Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Chemical Family
- Function
- Hardener
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
- Materials Features
- Advantages
- Low viscosity
- Very good film appearance
- Excellent resistance to a wide variety of chemicals
- Good mechanical properties
- Excellent corrosion protection
- Excellent HCl resistance
- Good flexibility
- 100% solids. Enables solvent free coatings - low VOC formulations
Applications & Uses
- Coating End Applications
- Plastics & Elastomers End Uses
- Markets
- Applications
- Application Information
- Solvent-free and high solids coatings
- Civil engineering
- Chemical resistant floorings
- Tank linings
- Pipe coatings
- Secondary containment systems
- Possible replacement of aromatic amines. Same blush free cure. Higher flexibility and resistance to inorganic acids, lower resistance to organic acids. With EPN 1183 very good fuel resistance.
Properties
- Physical Form
Regulatory & Compliance
Safety & Health
- Handling and Safety Precautions
- Danger! Corrosive. Will cause severe eye and skin irritation.
- Do not get in eyes, on skin or clothing.
- Do not inhale mist or vapors.
- Keep container tightly closed when not in use and during transport.
- Wash after handling.
First Aid
- In case of contact
- Eyes: Immediately flush with water for at least 15 minutes. Get immediate medical attention.
- Skin: Promptly wash thoroughly with mild soap and water.
- Inhalation: Remove to fresh air. Give oxygen if breathing is difficult.
- Ingestion: If conscious, give plenty of water. Get immediate medical attention.
Packaging & Availability
- Regional Availability
- Availability
ARADUR® 2973 hardener is supplied in 440 pound steel drums.
Storage & Handling
- Storage Information
This material should be stored at room temperature in the original sealed container
Other
- Appearance
- Clear, no contamination
- Color (SDS)
- Yellow
- Odor (SDS)
- Amine-like
- Chemical Properties
Value Units Test Method / Conditions Amine Value 300.0-335.0 mg KOH/g mg KOH/g - Physical Properties
Value Units Test Method / Conditions Density 1.08 g/cm³ g/cm³ At 25°C Flash Point 111.0 °C °C Closed Cup Gel Time 35.0 m m at 23°C, 250g GY 250 Viscosity 900.0-1400.0 cPs cPs At 25°C - Application Information
Value Units Test Method / Conditions Mix Ratio 45.0 g/100g g/100g GY 250