ARADUR® 3745

Used along with suitable epoxy resins, ARADUR® 3745 presents the following features:

• Moderate viscosity along with good working properties
• High mortar strength, but still slightly flexible
• Very good adhesion to wet concrete and sand-blasted steel
• Smooth, glossy, tack - free cured films or coatings
• Good corrosion protection

With liquid epoxy resins such as Araldite® GY 764, GY 783 or GY 793 for primers and adhesion promoters to problematic concrete substrates and also for heavy-duty corrosion protection. Due to its tolerance to wet conditions, ARADUR® 3745 can be applied to wet or damp concrete and difficult to wet substrates.

The optimum mix ratio for Araldite GY 783 and ARADUR® 3745 is 100:60 parts by weight.

Adhesion: Test results Salt spray on cold rolled steel (168 h) ARADUR® 3745 with different resins

Mandatory and recommended industrial hygiene procedures should be followed whenever our products are being handled and processed.

ARADUR® 3745 should be stored in a dry place, preferably in the sealed original container, at temperatures between 2 and 40 °C. The product should not be stored exposed to direct sunlight.