Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Chemical Family
- Function
- Hardener
- Industrial Additives Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Industrial Additives Features
- Labeling Claims
- Product Properties
Used along with suitable epoxy resins, ARADUR® 46-2 S presents the following features:
- A low level of viscosity making it easy to work
- A high level of reactivity with adequate working time
- Outstanding curing properties and short dust-dry time even at low temperatures (from 5°C) and high atmospheric humidity
- Very good mechanical properties
- Good all-round chemical resistance
- Smooth, glossy, non-tacky cured films (silk-gloss finish at > 8 °C)
- Good protection against corrosion
Applications & Uses
- Coating End Applications
- Industrial Additives End Use
- Markets
- Applications
- Application Information
In combination with liquid epoxy resins such as ARALDITE® GY 764, GY 783 and GY 793, ARADUR® 46-2 S is suitable to produce solvent-free floorings, epoxy resin mortars and coatings for anti-corrosion protection.
Properties
- Physical Form
Regulatory & Compliance
- Chemical Inventories
Technical Details & Test Data
- Mix Ratio Data
The optimum mix ratio for Araldite® GY 783 and Aradur® 46-2 S is 100 : 50 parts by weight.
- Technical Information
Storage & Handling
- Handling Precautions
Mandatory and recommended industrial hygiene procedures should be followed whenever our products are being handled and processed.
- Storage Information
ARADUR® 46-2 S should be stored in a dry place, preferably in the sealed original container, at temperatures between 2 and 40 °C. The product should not be stored exposed to direct sunlight.
Other
- Appearance
- Clear liquid
- Color (SDS)
- Yellow
- Odor
- Amine
- Application Information
Value Units Test Method / Conditions Mix Ratio 50.0 g/eq g/eq - Chemical Properties
Value Units Test Method / Conditions Amine Value 295.0-325.0 mg KOH/g mg KOH/g ISO 9702 - Physical Properties
Value Units Test Method / Conditions Density 1.06 g/cm³ g/cm³ ISO 1675 at 20°C Gel Time 28.0 m m Tecam Gelation Timer at 23°C, 250g, with Araldite GY 783 Viscosity 150.0-250.0 mPa.s mPa.s ISO 3219 at 25°C Viscosity 150.0-250.0 mPa.s mPa.s Rotational Viscometer at 25°C