ARADUR® 837-1

• No Bisphenol A, Phenol, Nonylphenol or Alkylphenols (SVHC-free)
• No Benzyl Alcohol (Low Emission Hardener)
• Good surface properties even at low Temperature (blushing)
• Low mix ratio (HAEW = 66 - 75)
• Relatively low viscosity (4600 – 6600 mPa.s)
• Flooring (low temperature)
• Coating
• 0 VOC Antico Primers (5-10°C Cure)
• Co-accelerator

ARADUR® 837-1 is highly reactive and therefore suitable for systems to be applied by two-component spraying equipment. Coatings/floorings exhibit:

• Short pot life and rapid cure
• Excellent resistance to inorganic acids and organic solvents such as hydrocarbons and alcohol
• Good mechanical properties
• Good adhesion to concrete and sandblasted steel
• Relatively good colour stability
• Tendency towards tacky surfaces when cured at low temperatures and high relative humidity.

In combination with liquid epoxy resins (e.g. Araldite® GY 250, GY 253, GY 257, GY 260, GY 266 and PY 302-2) ARADUR® 837-1 can be used to formulate solvent-free heavy-duty anti- corrosion coatings or flooring compounds. Because of its high reactivity ARADUR® 837-1 may be used to accelerate polyamidoamine or cycloaliphatic polyamine hardeners.

Araldite® GY 783 : 100 pbw
ARADUR® 837-1 : 35 pbw

Gel time (Tecam, 100 ml, 20 °C, 65% RH) : 19 mn

ARADUR® 837-1 should be stored in a dry place, preferably in the sealed original container, at temperatures between 2 and 40 °C. The product should not be stored exposed to direct sunlight.

Mandatory and recommended industrial hygiene procedures should be followed whenever our products are being handled and processed.