ARADUR® 891

• The solvent-free and low-viscosity ARADUR® 891 has very good processing properties and can be washed down with water.
• In combination with Araldite® GY 783 It is used for bonding and joining of tiles, e.g. in baths, slaughter houses, dairies, breweries and beverage filling stations.
• It has good resistance to inorganic acids, less good resistance to oxidizing and organic acids and moderate resistance to solvents.
• The curing process slows down at temperatures below 20 °C. This delay can be compensated by adding small quantities of accelerator 960-1.

An epoxy adhesive system, preferably for bonding and joining tiles.

The optimum mix ratio for Araldite® GY 783 and ARADUR® 891 is 100:40 parts by weight.

regular procedures approved by local authorities

ARADUR® 891 should be stored in a dry place, preferably in the sealed original container, at temperatures between 2 and 40°C (temperatures will never be allowed to drop under 0 °C). The products should not be stored exposed to direct sunlight.

Mandatory and recommended industrial hygiene procedures should be followed whenever our products are being handled and processed.