ARADUR® HY 918

• Excellent mechanical and electrical properties
• Easily mixed at room temperature
• Non-staining or fuming
• Low viscosity
• Long pot life
• Light in color

• Casting
• Potting
• Vaccuum-pressure impregnation

In case of contact:

• Skin : Immediately wash with soap and water. Remove contaminated clothing and launder before reuse.Destroy contaminated shoes.
• Eyes : Immediately flush with water for at least 15 minutes. Call a physician.
• Ingestion : If conscious, give plenty of water to drink. Do not induce vomiting. Call a physician.
• Inhalation : Remove to fresh air. Administer oxygen or artificial respiration if necessary. Call a physician.
• Other : Referral to physician is recommended if there is any question about the seriousness of any injury.

• 5-gallon pail (40 lbs)
• 55-gallon drum (550 lbs)

• Store at 70-90°F. This product is moisture sensitive and packaged under a blanket of dry nitrogen.
• Maintain the factory seal, after use reblanket with dry nitrogen and tightly reseal.
• Work in a well ventilated area and use clean, dry tools for mixing and applying.
• For two component systems, combine the resin and hardener according to the mix ratio.
• Mix thoroughly and use immediately after mixing. Material temperature should not be below 65°F (18℃) when mixing.
• To protect against any potential health risks presented by our products, the use of proper personal protective equipment (PPE) is recommended.
• Eye and skin protection is normally advised.
• Respiratory protection may be needed if mechanical ventilation is not available or is insufficient to remove vapors.
• Provided these materials are stored under the recommended storage conditions in their original containers, they will remain in usable condition for 1 year.