ARALDITE® AV 180-2 / HARDENER HY 180-2

• Solvent-free, green and environmentally friendly product
• Suitable for application in all directions, including horizontal, vertical and top surface construction
• Good mechanical strength and aging resistance
• Good water resistance and chemical corrosion resistance
• Strong bonding with carbon fiber and good wetting performance
• Good impact peel strength

Pretreatment

The strength and durability of the bond depends on the correct pretreatment of the bonding surface. The surface (including the anchor holes) should be dry and clean, free of any laitance, loose materials, dust, oil and grease. The surface of the carbon fiber fabric should be free of oil and grease.

Application of adhesive

Stir Araldite® AV180-2 CF and curing agent HY180-2 CF separately to eliminate any sediment Pour Araldite® AV180-2 CF and curing agent HY180-2 CF into a mixing container according to the following mixing ratio. A simple stirrer (such as a spatula or other tool) can be used to stir slowly until the products inside and at the bottom of the mixing container are completely mixed and the color is uniform. Apply the colloid evenly to the surface to be bonded within the construction time

Cleaning up

Uncured adhesive can be scraped off or cleaned with a solvent (such as acetone). All tools should be used before the adhesive residue has cured.Wash with hot water and soapy water. Cured residue is difficult to remove. If cleaning with solvents such as acetone, proper. Precautions: Also, avoid contact with skin and eyes.

• Araldite® AV180-2 CF / Curing Agent HY180-2 CF can be stored in unopened containers at room temperature of 18-25°C for 24 months.The expiration date can be found on the container label.
• Huntsman Advanced Materials products are generally harmless when used under the specified safety precautions. Uncured material should not come into contact with food or food utensils. Also, precautions should be taken to prevent uncured material from coming into contact with the skin, as some people with skin allergies may be affected. Generally, impermeable rubber or plastic gloves should be worn; also wear protective glasses. Wash skin thoroughly with soap and warm water at the end of each work. Avoid the use of solvents. Use paper towels, not towels, to clean the skin. Provide adequate ventilation in the workplace.