ARALDITE® GZ 7071 F 65

ARALDITE® GZ 7071 F 65 is low molecular weight solid epoxy resin solution supplied at 65% to 75% solids by weight in organic solvents. The Araldite® GZ 7071 epoxy resin solutions are suitable for the formulation of a wide variety of solvent borne coatings formulations. When cross-linked with polyamide, polyamine or amine adduct hardeners, these resins form hard, tough, chemically resistant coatings that cure at room temperature.

 

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

Chemical Family: Epoxy & Epoxy Derivatives

Product End Uses: Concrete Coating, Floor Coatings, Marine Finishes, Pipe Coating, Solventborne Coating, Tank Linings

Material Compatibility: Amines, Polyamide Polymers

Product Features: Chemical Resistance, Excellent Adhesion, Excellent Film Forming Properties, Good Hardness, Good Toughness, Good Wetting Properties, High Flexibility, Light Color, Low Molecular Weight

Technical Data Sheet
View All Documents

Enhanced TDS

Identification & Functionality

Blend
No
Chemical Family
Epoxy & Epoxy Derivatives
Function
Binder & Resin,Binder & Resin
Product Functions
Binder
Single Ingredient
Yes
Technologies
CASE
Product Families
CASE — Resins & Binders
Epoxies

Features & Benefits

Product Features
Chemical Resistance,
Excellent Adhesion,
Excellent Film Forming Properties,
Good Hardness,
Good Toughness,
Good Wetting Properties,
High Flexibility,
Light Color,
Low Molecular Weight
Key Properties
  • Excellent film forming properties
  • Excellent adhesion
  • Good chemical resistance
  • Clear and light in color
  • Superior wetting properties
  • Good compatibility with solvents and hardeners
  • FDA sanctioned (CR 175.300)

Applications & Uses

Product End Uses
Concrete Coating,
Floor Coatings,
Marine Finishes,
Pipe Coating,
Solventborne Coating,
Tank Linings
Markets
Automotive & Transportation,
Building & Construction,
Paints & Coatings
Applications
Automotive & Transportation — Coatings & Finishes
Marine Coatings
Automotive & Transportation — Transportation
Marine
Building & Construction — Building Materials
Pipes & Plumbing
Paints & Coatings — Building & Construction
Concrete Coatings & Stains
Paints & Coatings — Industrial Coatings
Appliances & Consumer Goods

Regulatory & Compliance

Compliance (Regulatory)
FDA 21 CFR 175.300
FDA Status

Cured coatings made with this resin and other approved components meet the requirements of the Food & Drug Administration regulation 21 CFR 175.300, for the safe use as a food-contact surface under the condition described in this section. Solvents are not covered and must be removed in the final coating.

Packaging & Availability

Regional Availability
  • Americas

Storage & Handling

Storage Information

ARALDITE® GZ 7071 F-65 low molecular weight solid epoxy resin solution should be stored in a dry place, in their original sealed container, at a temperature between +2°C and +40°C (+35.6°F and +104°F). Under these storage conditions, the shelf life of ARALDITE® GZ 7071 F-65  is 3 years. This products should not be exposed to direct sunlight.

Other

Appearance
Clear, no contamination
Material Compatibility
Amines,
Polyamide Polymers
Physical Properties
ValueUnitsTest Method / Conditions
Density8.9g/cm³at 25°C
Flash Point11.0°CClosed Cup