Enhanced TDS
Identification & Functionality
- Chemical Family
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features and Benefits
- Laminating Araldite LY 3508 has a good toughness effect combined with a low viscosity
Applications & Uses
- Composites Processing Methods
- Processing Information
- Wet lay-up
- Filament Winding
- Pressure Moulding
- Resin Transfer Moulding (RTM)
Properties
- Physical Form
Technical Details & Test Data
- Processing Guidelines
Components Parts by weight Parts by volume Araldite LY 3508 100 100 Hardener XB 3473 23 27 - We recommend that the components are weighed with an accurate balance to prevent mixing inaccuracies which can affect the properties of the matrix system.
- The components should be mixed thoroughly to ensure homogeneity. It is important that the side and the bottom of the vessel are incorporated into the mixing process.
- When processing large quantities of mixture the pot life will decrease due to exothermic reaction. It is advisable to divide large mixes into several smaller containers.
- Properties of The Cured, Neat Formulation
Processing Guidelines
- We recommend that the components are weighed with an accurate balance to prevent mixing inaccuracies which can affect the properties of the matrix system.
- The components should be mixed thoroughly to ensure homogeneity. It is important that the side and the bottom of the vessel are incorporated into the mixing process.
- When processing large quantities of mixture the pot life will decrease due to exothermic reaction. It is advisable to divide large mixes into several smaller containers.
Properties of The Cured, Neat Formulation
Property Value (LY 3508) Value (XB 3473) Unit Test Method Condition Glass Transition Temperature (Tg) 170 - 180 170 - 180 °C ISO 11357-2, DSC, 10 K/MIN 1 h 120°C + 2 h 200°C
Glass Transition Temperature (Tg) 170 - 180 170 - 180 °C ISO 11357-2, DSC, 10 K/MIN 2 h 120°C + 2 h 140°C + 2 h 180°C
Flexural Strength 95 - 110 95 - 110 MPa ISO 178 2 h 120°C + 2 h 140°C + 2 h 180°C
Elongation at Flexural Strength 5.5 - 7.0 5.5 - 7.0 % ISO 178 2 h 120°C + 2 h 140°C + 2 h 180°C
Flexural Modulus 2350 - 2450 2350 - 2450 MPa ISO 178 2 h 120°C + 2 h 140°C + 2 h 180°C
Fracture Toughness (K1C) 0.7 - 0.8 0.7 - 0.8 MPa√m ISO 13586 2 h 120°C + 2 h 140°C + 2 h 180°C
Fracture Energy (G1C) 220 - 260 220 - 260 J/m² ISO 13586 2 h 120°C + 2 h 140°C + 2 h 180°C
Water Absorption 0.54 - 0.62 0.54 - 0.62 % ISO 62 15 min 120°C + 2 h 150°C, 10 days H₂O 23°C
Safety & Health
- First Aid Information
- Contamination of the eyes by resin, hardener or mix should be treated immediately by flushing with clean, running water for 10 to 15 minutes.
- A doctor should then be consulted. Material smeared or splashed on the skin should be dabbed off, and the contaminated area then washed and treated with a cleansing cream (see above).
- A doctor should be consulted in the event of severe irritation or burns.
- Contaminated clothing should be changed immediately. Anyone taken ill after inhaling vapours should be moved out of doors immediately. In all cases of doubt call for medical assistance.
Storage & Handling
- Storage Conditions
- Provided that Araldite LY 3508, Hardener XB 3473 are stored in a dry place in their original, properly closed containers at the storage temperatures mentioned in the MSDS they will have the shelf lives indicated on the labels.
- Partly emptied containers should be closed immediately after use.
- Epoxy Araldite LY 3508 which has crystallized and looks cloudy can be restored to its original state by heating to 60 - 80°C.
- Handling Information
Protective clothing
Yes Gloves Essential Arm protector Recommended when skin contact likely
Goggestery diasses
Yes Respirator/dust mask
Recommended Skin protection before starting work
Apply barrier cream to exposed skin
Skin protection after washing
Apply barrier or nourishing cream
Skin protection cleansing of contaminated skin
Dab off with absorbent paper, wash with warm water and alkali-free soap, then dry with disposable towels. Do not use solvents
Clean shop requirements
Cover workbenches, etc. with light coloured paper. Use disposable breakers, etc.
Disposal of spillage
Soak up with sawdust or cotton waste and deposit in plastic-lined bin
Ventilation: of workshop
Renew air 3 to 5 times an hour
Ventilation: of workplace
Exhaust fans. Operatives should avoid inhaling vapours.