ARALDITE® LY 3585 / ARADUR® 3486

• Reactive diluent free laminating system.
• Exhibits very high ultimate elongation in combination with a long pot life and high temperature resistance.

• Filament Winding
• Resin Transfer Moulding (RTM)
• Pressure Moulding
• Wet lay-up

5 h 100 °C

Processing Guidelines

• We recommend that the components are weighed with an accurate balance to prevent mixing inaccuracies which can affect the properties of the matrix system.
• The components should be mixed thoroughly to ensure homogeneity. It is important that the side and the bottom of the vessel are incorporated into the mixing process.
• When processing large quantities of mixture the pot life will decrease due to exothermic reaction. It is advisable to divide large mixes into several smaller containers.

Properties of The Cured, Neat Formulation

Note: 5 h 100°C

• Contamination of the eyes by resin, hardener or mix should be treated immediately by flushing with clean, running water for 10 to 15 minutes.
• A doctor should then be consulted. Material smeared or splashed on the skin should be dabbed off, and the contaminated area then washed and treated with a cleansing cream (see above).
• A doctor should be consulted in the event of severe irritation or burns.
• Contaminated clothing should be changed immediately. Anyone taken ill after inhaling vapours should be moved out of doors immediately. In all cases of doubt call for medical assistance.

• Provided that the products described above are stored in a dry place in their original, properly closed containers at the above mentioned storage temperatures they will have the shelf lives indicated on the labels.
• Partly emptied containers should be closed immediately after use.
• Araldite® LY 3585 which has crystallized and looks cloudy can be restored to its original state by heating to 60 - 80 °C.