Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Function
- Binder & Resin,Binder & Resin
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
- Key Properties
Excellent compatibility with virtually all water-based hardeners. The end properties of such systems depend particularly on the choice of hardeners and additives used.
Applications & Uses
- Coating End Applications
- Compatible Substrates & Surfaces
- Markets
- Applications
- Application Information
Combined with virtually any water-dilutable hardeners as a cross-linking agent, Araldite® PZ 756-1/67 is a suitable epoxy resin component for surface technologies and adhesives which can be diluted with water, or a suitable reactive component in epoxy cement mortars.
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Packaging & Availability
- Regional Availability
Storage & Handling
- Storage and Handling Information
Araldite® PZ 756-1/67 should be stored in a dry place, preferably in the sealed original container, at temperatures between 2 and 40 °C (temperatures will never be allowed to drop under 0 °C). The product should not be stored exposed to direct sunlight. With Araldite PZ 756/67 there is a tendency for the emulsion to settle slightly (reverse cream effect), i.e. for the resin concentration in the drum to vary, according to the storage time and conditions. Thorough mixing is therefore recommended before drum's content is removed. If in any case the material has been exposed to temperatures below 0 °C extensive settling will occur, probably with some phase separation. In such cases the content can only be rehomogenized briefly by using high shear agitation tools like dissolvers; simple stirring will not fit. However batches thus treated do not have any long-term stability and must be processed without delay.
Other
- Appearance
- White emulsion
- Color (SDS)
- White
- Odor
- None
- Chemical Properties
Value Units Test Method / Conditions Epoxy Equivalent Weight 270.0-295.0 g/eq g/eq ISO 3001 - Physical Properties
Value Units Test Method / Conditions Density 1.1 g/cm³ g/cm³ ISO 1675 at 20°C Flash Point min. 200.0 °C °C Pensky-Martens Closed Cup (PMCC) Flash Point min. 200.0 °C °C ISO 2719 Viscosity 80.0-400.0 mPa.s mPa.s ISO 3219-A at 25°C Viscosity1 50.0-400.0 mPa.s mPa.s ISO 3219 at 25°C