Enhanced TDS
Identification & Functionality
- Chemical Family
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Product Features
- Key Properties
- Low Density
- Self Extinguishing
- Short Work Life
Applications & Uses
Properties
- Notes
*Resin/filler separation may occur in Epocast® 1615A resin. Material must be remixed before dispensing from container.
Cure Schedule :- 24 hours at 77°F (25°C) or gel at room temperature plus five hours at 125°F (52°C).
- Notes
* - Resin/filler separation may occur in Epocast® 1615A resin. Material must be remixed before dispensing from container.
Regulatory & Compliance
- OEM Specifications
Technical Details & Test Data
- Cured Properties
Property Test Method Value Unit Tensile lap shear, after 5 hours at 125°F (52°C) ASTM D1002 700 psi Compressive strength at 77°F (25°C) ASTM D695 6 ksi Compressive modulus at 77°F (25°C) ASTM D695 450 ksi Flammability (horizontal) BMS 5-28 self extinguishing
Flammability (vertical) BMS 5-28 self extinguishing
Flow at 77°F (25°C), maximum BMS 5-28 1 in Flow at 125°F (52°C) BMS 5-28 2 in Weight gain on immersion (24 hours at 77°F (25°C)) ASTM D543 1 % Weight gain on immersion (TT-S-735, Type III test fluid) ASTM D543 2.1 % Weight gain on immersion (Mil-M-5606 hydraulic fluid) ASTM D543 2 % Weight gain on immersion (Skydrol 500-A) ASTM D543 2 % Weight gain on immersion (Distilled water) ASTM D543 2 % - Mixing Ratio
- To 100 parts by weight of Epocast 1615-A resin, add 14 parts by weight of Epocast 1615-B hardener.
- Mix both components thoroughly for several minutes to assure complete blending.
Packaging & Availability
- Regional Availability
Storage & Handling
- Storage Conditions
- EPOCAST® 1615 A/B should be stored in a dry place, in the sealed original container, at temperatures between 2°C and 40°C.
- The product should not be exposed to direct sunlight. Under these storage conditions, and when supplied under Huntsman standard certification, this product has a shelf life of 6 months (expiration date may differ based on customer specification).
- Material temperatures should be above 18°C when mixing. After use, tightly reseal containers.
- Storage Information
- Epocast® 1615-A/B should be stored in a dry place, in the sealed original container, at temperatures between +2C and +40C (+35.6°F and 104°F).
- The product should not be exposed to direct sunlight.
- Under these storage conditions, and when supplied under Huntsman standard certification, this product has a shelf life of 6 months (expiration date may differ based on customer specification).
- Material temperatures should be above 18C (65°F) when mixing.
- After use, tightly reseal containers.
Other
- Appearance
- Off white paste
- Application Information
Value Units Test Method / Conditions Mix Ratio 0.14 %(W) Hardener : Resin - Physical Properties
Value Units Test Method / Conditions Density 0.7 g/cm³ ASTM D1622 Gel Time 15.0 m ASTM D2471 at 25°C, 50g