Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Function
- Curing Agent,Accelerator
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Product Benefits
- Rapid Cures
- Low Temperature Cures
- Thin Film Cures
- Low Toxicity
- Excellent Color
- Features and Benefits
- Rapid Cures
- Low Temperature Cures
- Thin Film Cures
- Low Toxicity
- Excellent Color
Applications & Uses
- Adhesive & Sealant End Applications
- Markets
- Applications
- Application Areas
- Consumer Patch Kits
- Road Marker Adhesives
- Industrial Adhesives
- Jewelry and Craft Adhesive Cure
- Acceleration of Epoxy Adhesive Cure
- Application Information
- Consumer Patch Kits
- Road Marker Adhesives
- Industrial Adhesives
- Jewelry and Craft Adhesive Cure
- Acceleration of Epoxy Adhesive Cure.
-
Designed to give a 3-minute gel time when mixed at a 1:1 by weight ratio with Bis A epoxy resin.
Properties
- Physical Form
Regulatory & Compliance
Technical Details & Test Data
- Processing Information
- GABEPRO™; GPM-888 curing agent is a pre-accelerated polymercaptan blend designed to harden epoxy resins in approximately 5 minutes. (Even in thin films and at low temperatures).
- This material can be used directly in a two-part epoxy system. Or it may be further formulated to achieve your desired property balance. Care should be taken to avoid introducing iron contamination.
- The catalyst, fillers, other additives and the equipment used should be selected carefully with avoidance of iron contamination in mind. Iron contamination in connection with oxygen in the atmosphere may cause skinning in some systems.
Packaging & Availability
- Regional Availability
Storage & Handling
- Storage Information
- GABEPRO™; GPM-888 curing agent should be stored in a dry place, in its sealed original container, at temperatures between 10°C - 30°C (50°F - 86°F).
- Under these storage conditions the shelf life is 24 months from date of manufacture.
- The product should not be exposed to direct sunlight.
Other
- Appearance (SDS)
- Liquid
- Color (SDS)
- Clear, colourless, light yellow
- Insoluble in (SDS)
- Water
- Odor (SDS)
- Rotten egg like
- Physical Properties
Value Units Test Method / Conditions Gel Time 3.0-4.0 m m at 25°C Viscosity 10000.0-16000.0 mPa.s mPa.s Brookfield Viscometer at 25°C - Application Information
Value Units Test Method / Conditions Mix Ratio 100.0 phr phr with bis A epoxy resin