Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Function
- Binder & Resin,Resin
- Polymer Name
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- Key Properties
- HYPOX® RK84L is an adduct of solid bis-A epoxy resin toughened with CTBN. It is designed for powder coatings in which it can be the sole epoxy resin component or a modifier. It improves impact tolerance, toughness, and adhesion to pipe. CTBN content: 32% HYPRO® 1300X13
- Product Characteristics
- Adduct of solid bis-A epoxy resin toughened with CTBN. It improves impact tolerance, toughness, and adhesion. Solid (Softening Point: <100°C).
Applications & Uses
- Coating End Applications
- Plastics & Elastomers End Uses
Properties
- Physical Form
Regulatory & Compliance
Packaging & Availability
- Regional Availability
Storage & Handling
- Storage Information
- HYPOX® RK84L should be stored in a dry place, preferably in the sealed original container, at temperatures between 2 and 18 °C. The product should not be stored exposed to direct sunlight. Keep away from food, drink and animal feeding stuff.
- Handling Precautions
HYPOX® RK84L is not a primary skin irritant or sensitizer. However, as with any epoxy material, irritation can result from repeated or prolonged contact. The symptoms of this irritation may appear as a mild reddening or a more pronounced rash. It is, therefore, important to avoid skin contact where possible. Butyl rubber gloves, full eye protection and protective clothing are recommended.
Skin contact: Wash well with soap and water. Remove contaminated clothing and wash thoroughly before reusing. It is recommended that resin not be removed from skin with solvents since solvents increase contact and encourage penetration. Moreover, solvents of themselves dry and crack the skin.
Eye contact: Flush immediately with large quantities of water. Contact a physician.
Other
- Appearance
- Opaque, clear
- Color (SDS)
- Clear, amber
- Odor (SDS)
- Slight aromatic
- Physical Properties
Value Units Test Method / Conditions Viscosity 300000.0-500000.0 mPa.s mPa.s at 27°C Viscosity 300.0-500.0 Pa.s Pa.s Cone-Plate Viscometer at 100°C