HYPRO® 1300X16 ATBN

• Enhances the toughness and flexibility of thermoset resins
• Improves adhesion to substrates that are difficult to bond to
• Mid-range acrylonitrile-containing ATBN (18%) which improves compatibility with epoxy system
• Increases low-temperature mechanical properties
• Increases impact and wear resistance

• Structural adhesive paste
• Composites
• Coatings and linings for corrosion resistance
• Construction joint sealers and mastics
• End uses include aerospace, construction, composites and industrial applications

HYPRO® 1300X16 ATBN is amine functional material, irritation can result from repeated or prolonged contact. The symptoms of this irritation may appear as a mild reddening or a more pronounced rash. It is, therefore, important to avoid skin contact where possible. Butyl rubber gloves, full eye protection and protective clothing are recommended. Skin contact: Wash well with soap and water. Remove contaminated clothing and wash thoroughly before reusing. It is recommended that resin not be removed from skin with solvents since solvents increase contact and encourage penetration. Moreover, solvents of themselves dry and crack the skin.

• Eye contact: Flush immediately with large quantities of water. Contact a physician.

• HYPRO® 1300X16 ATBN should be stored in a dry place, preferably in the sealed original container, at temperatures between 2 and 40°C. The product should not be stored exposed to direct sunlight.
• Keep away from food, drink and animal feeding stuff.
• Under these storage conditions, the product has a shelf life of 6 months. The products should not be exposed to direct sunlight.