HYPRO® 1300X31 CTBN

• Enhances Toughness/Flexibility of Thermoset Resins such as Epoxies
• Improves Adhesion to Difficult to Bond to Substrates
• Increases Low Temperature Mechanical Properties
• Increases Impact/Crack Resistance
• Improves Durability (Fatigue Resistance)
• Lowest Acrylonitrile Containing CTBN
• Provides Hydrophobicity

• Film and paste adhesives (structural and semi-structural applications)
• Composites
• Thermoset Compatibilizer
• End uses include Automotive, Electrical/Electronics, Marine, Construction and Industrial Applications

Product Characteristics

• HYPRO® 1300X31 CTBN used as a reactant with a base thermoset resin to gain product performance improvements

• HYPRO® 1300X31 CTBN is not a primary skin irritant or sensitizer. However, as with any epoxy material, irritation can result from repeated or prolonged contact. The symptoms of this irritation may appear as a mild reddening or a more pronounced rash. It is, therefore, important to avoid skin contact where possible. Butyl rubber gloves, full eye protection and protective clothing are recommended.
• Skin contact: Wash well with soap and water. Remove contaminated clothing and wash thoroughly before reusing. It is recommended that resin not be removed from skin with solvents since solvents increase contact and encourage penetration. Moreover, solvents of themselves dry and crack the skin.
• Eye contact: Flush immediately with large quantities of water. Contact a physician.

HYPRO® 1300X31 CTBN material should be stored in a dry place, in the sealed original containers, at temperatures between 2°C and 40°C (35.6°F and 104°F). Under these storage conditions, the product has a shelf life of 12 months (from date of manufacture). The products should not be exposed to direct sunlight.