HYPRO® 1300X45 ATBN

• Enhances the toughness and flexibility of thermoset resins
• Improves Adhesion to Difficult to Bond to Substrates
• Minimal Amount of Excess Amine
• Ideal for Chain Extending Epoxies
• Provides Hydrophobicity
• Increases Low Temperature Mechanical Properties
• Increases Impact/Crack Resistance

• Structural adhesive paste
• Adhesives
• Coatings
• End uses include Automotive, Construction, Electrical and Industrial Applications

Product Characteristics

• Very low content of residual N-AEP (max. 0.1%).

• HYPRO® 1300X45 ATBN is not a primary skin irritant or sensitizer. However, as with any epoxy material, irritation can result from repeated or prolonged contact. The symptoms of this irritation may appear as a mild reddening or a more pronounced rash. It is, therefore, important to avoid skin contact where possible. Butyl rubber gloves, full eye protection and protective clothing are recommended.
• Skin contact: Wash well with soap and water. Remove contaminated clothing and wash thoroughly before reusing. It is recommended that resin not be removed from skin with solvents since solvents increase contact and encourage penetration. Moreover, solvents of themselves dry and crack the skin.
• Eye contact: Flush immediately with large quantities of water. Contact a physician.

• HYPRO® 1300X45 ATBN material should be stored in a dry place, in the sealed original containers, at temperatures between 2°C and 40°C (35.6°F and 104°F).
• Under these storage conditions, the product has a shelf life of 6 months (from date of manufacture). The products should not be exposed to direct sunlight.