HYPRO® 1300X63 ETBN

• Reactive Liquid Polymers (RLP) are 100% solids liquid rubbers used to improve the toughness, flexibility, adhesion and impact resistance of thermoset resin systems including epoxies, vinyl esters, unsaturated polyesters, acrylics. The elastomer improves the toughness and impact, thermal shock and peel resistance of the epoxy formulation. These improvements are attained with little loss of thermal resistance and modulus. HYPRO® 1300X63 ETBN is compatible with all standard bis-A epoxy resins and curing agents.

HYPRO® 1300X63 ETBN is suggested for use as a toughener in fiber-reinforced products, adhesives, molding compounds, potting and encapsulating compounds and chemical-resistant coatings. HYPRO® 1300X63 ETBN can be blended with other components to achieve the degree of toughening required.

• Molding compounds
• industrial Adhesives
• Impact resistance coatings
• Thermocycling modifier for epoxies
• Toughening of prepregs, and composites and structural adhesives

HYPRO® 1300X63 ETBN is not a primary skin irritant or sensitizer. However, as with any epoxy material, irritation can result from repeated or prolonged contact. The symptoms of this irritation may appear as a mild reddening or a more pronounced rash. It is, therefore, important to avoid skin contact where possible. Butyl rubber gloves, full eye protection and protective clothing are recommended.

• Skin contact: Wash well with soap and water. Remove contaminated clothing and wash thoroughly before reusing. It is recommended that resin not be removed from skin with solvents since solvents increase contact and encourage penetration. Moreover, solvents of themselves dry and crack the skin.
• Eye contact: Flush immediately with large quantities of water. Contact a physician.

• HYPRO® 1300X63 ETBN should be stored in a dry place, preferably in the sealed original container, at temperatures between 2 and 40°C. The product should not be stored exposed to direct sunlight. Keep away from food, drink and animal feeding stuff.