IROGRAN® A 75 E 5040

IROGRAN® A 75 E 5040 is a polyester-based thermoplastic polyurethane (TPU) for extrusion and injection molding applications. It is plasticizer-free and offers excellent multilayer bonding, wear performance, high elasticity, short cycle times, robust processing, and high melt stability.

 

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

Polymer Name: Thermoplastic Polyurethane (Polyester based)

Processing Methods: Calendering, Injection Molding

End Uses: Cable Jacketing, Thick-Walled Parts, Thin-walled Parts

Density:: 1150.0~1150.0

BrochureSafety Data SheetTechnical Data Sheet
View All Documents

Enhanced TDS

Identification & Functionality

Blend
No
Chemical Family
Polyurethanes (PU),
Thermoplastic Polyurethanes (TPU)
Polymer Name
Thermoplastic Polyurethane (Polyester based)
Single Ingredient
Yes
Technologies
Elastomers
Product Families
Elastomers — Thermoplastic Elastomers
Thermoplastic Urethanes (TPU)

Features & Benefits

Labeling Claims
Plasticizer-free
Materials Features
Good Wear Properties,
High Elasticity,
High Melt Stability,
Robust,
Shorter Cycle Time

Applications & Uses

Plastics & Elastomers End Uses
Cable Jacketing,
Thick-Walled Parts,
Thin-walled Parts
Plastics & Elastomers Processing Methods
Calendering,
Injection Molding
Markets
Electrical & Electronics,
Industrial
Applications
Electrical & Electronics — Wire & Cable
Jacketing & Insulation
Industrial — Chemical & Industrial Manufacturing
Equipment & Parts
Material Preparation

Irogran® A 75 E 5040 is supplied pre-dried, however to ensure trouble-free processing it is preferable to dry before use. The recommended drying conditions are:

  • 3 hours at 80-90°C in circulating air
  • 3 hours at 70-80°C in dehumidified air
  • Dew point: -30°C
Application Information
Thin wall extrusion profiles, thick wall extrusion profiles, cable jacketing and calendering applications.

Properties

Physical Form
Pellets

Regulatory & Compliance

Chemical Inventories
AIIC (Australia),
ENCS (Japan),
IECSC (China),
KECI (Korea),
NZIoC (New Zealand),
TCSI (Taiwan),
TSCA (USA)

Safety & Health

Health & Safety Advice
Before undertaking any trials with this product it is essential that all personnel are aware of the necessary precautions that must be taken.

Packaging & Availability

Packaging Type
Bags,
Drums,
Octabin
Regional Availability
  • Global

Storage & Handling

Storage Information

Irogran® A 75 E 5040 has a minimum expected shelf life of 12 months after shipment date. The product should be stored in a dry and cool place in the manufacturer ́s original packaging.

Other

Appearance (SDS)
Pellets
Mechanical Properties
ValueUnitsTest Method / Conditions
Hardness25.0Shore DASTM D2240 after 3s.
Hardness75.0Shore AASTM D2240 after 3 seconds
Hardness25.0Shore DISO 7619 after 3s.
Hardness75.0Shore AISO 7619 after 3 seconds
Tensile Strength2200.0psiASTM D412
Physical Properties
ValueUnitsTest Method / Conditions
Density1.15g/cm³ASTM D792
Melting Point150.0-190.0°CThermomechanical Analyzer
SDS Physical and Chemical Properties
ValueUnitsTest Method / Conditions
Storage Temperature (SDS)4.0-49.0°C