REN® HY 5211 Slow / RENGEL® SW 5200

• Exceptionally high temperature resistance.
• Variable speed of cure control.
• Very easy to apply and does not drain off vertical surfaces.
• Partial cure at room temperature completed with indicated post cure.
• Excellent inter layer adhesion.

• Mix the two components thoroughly in the ratio indicated, then impregnate each layer of cloth as it is laid up to construct the laminate.
• Apply in thin layer with a brush or spatula, wait until gel coat has gelled to the tacky stage before applying backing structure.
• Post-curing is essential to benefit the final properties.

The product should be used when in the temperature range 18-25°C.

• Extremely large tools can be produced due to very long pot life.
• Tools requiring heat resistance up to 200° C.
• Fast, medium and slow hardeners allow full control over reaction.
• Pre-preg lay-up tools.
• The product should be used when in the temperature range 18-25°C.

Note: After cure: 24hours room temperature+ 12hours at 40°C + 2hours at 80°C + 2hours at 100°C + 2hours at 120°C + 2hours at 140°C + 2hours at 160°C + 2 hours at 180°C + 12hours at 200°C and slowly cooled down to room temperature.

Processing Information

• Mix the two components thoroughly in the ratio indicated, then impregnate each layer of cloth as it is laid up to construct the laminate.
• Apply in thin layer with a brush or spatula, wait until gel coat has gelled to the tacky stage before applying backing structure.
• Post-curing is essential to benefit the final properties.

• Huntsman Advanced Materials products are generally quite harmless to handle provided that certain precautions normally taken when handling chemicals are observed.
• The uncured materials must not, for instance, be allowed to come into contact with foodstuffs or food utensils, and measures should be taken to prevent the uncured materials from coming in contact with the skin, since people with particularly sensitive skin may be affected.
• The wearing of impervious rubber or plastic gloves will normally be necessary; likewise the use of eye protection.
• The skin should be thoroughly cleansed at the end of each working period by washing with soap and warm water.
• The use of solvents is to be avoided. Disposable paper - not cloth towels - should be used to dry the skin. Adequate ventilation of the working area is recommended.
• These precautions are described in greater detail in the Material Safety Data sheets for the individual products.
• These should be referred to for fuller information.

• Provided that REN® HY 5211 Slow / RENGEL® SW 5200 is stored in a dry place in their original, properly closed containers at the storage temperatures mentioned in the MSDS they will have the shelf lives indicated on the labels.
• Partly emptied containers should be closed immediately after use.