Enhanced TDS
Identification & Functionality
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Features
- 110°C temperature resistance
- High strength at demould
- Easily machinable
- Very easy to pour due to low viscosity
- Chemical resistant
Applications & Uses
- Application Area
- Composites Processing Methods
- Product End Uses
- Markets
- Applications
- Application Information
- Temperature resistant tooling
- Vacuum forming tools
- Foam moulding tooling
- Tools for pre-preg lamination
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Properties
Condition: 14h gradually up to 100℃
Property Value Unit Test Method Density 1.75 g/cm³ ISO 1183 Hardness 90 Shore D ISO 868 Coefficient of Thermal Expansion 45 10⁻⁶ K⁻¹ ISO 11359 Deflection Temperature 110 °C ISO 75 Compressive Strength 135 MPa ISO 604 Compressive Modulus 7,500 MPa ISO 604 Flexural Strength 95 MPa ISO 178 Linear Shrinkage 0.4 mm/m Abrasion Resistance 50 - 55 mm³/100 U Taber - Mixed Ratio Information
Mix ratio Parts by weight RenCast©CW 61 100 Ren© HY 97 blue 10 Mix the two components thoroughly in the ratio indicated. If fine details are to be reproduced, a thin layer of mixed resin and hardener should be applied to the mould surface using a short bristle brush before casting. Evacuated materiel will improve properties. Post-curing will improve final properties.
Safety & Health
- Handling Precaution
Our products are generally quite harmless to handle provided that certain precautions normally taken when handling chemicals are observed. The uncured materials must not, for instance, be allowed to come into contact with foodstuffs or food utensils, and measures should be taken to prevent the uncured materials from coming in contact with the skin, since people with particularly sensitive skin may be affected. The wearing of impervious rubber or plastic gloves will normally be necessary; likewise the use of eye protection. The skin should be thoroughly cleansed at the end of each working period by washing with soap and warm water. The use of solvents is to be avoided. Disposable paper - not cloth towels - should be used to dry the skin. Adequate ventilation of the working area is recommended. These precautions are described in greater detail in the Material Safety Data sheets for the individual products and should be referred to for fuller information.
Packaging & Availability
- Packaging Information
System CW 61 HY 97 blue Quantity and Weight 1 x 10kg 4 x 1kg
Storage & Handling
- Storage Information
Provided that RenCast® CW 61 and Ren® HY 97 blue are stored in a dry place in their original, properly closed containers at the storage temperatures mentioned in the MSDS they will have the shelf lives indicated on the labels. Partly emptied containers should be closed immediately after use.The product should be used when in the temperature range 18-25°C.