RENCAST® CW 61 / REN® HY 97-1

• Heat resistance up to 110°C
• High demolding strength
• Very easy to cast due to its low viscosity
• Good chemical resistance
• Easily machinable

• High-temperature resistant tools
• Thermoforming tools
• Foam molds
• Prepreg layup tools

Mix the two components thoroughly in the specified ratio. To reproduce small details, apply a thin layer of mixed resin and hardener before casting using a short-bristled brush. Degassing improves the properties. Post-curing improves the final properties.

Storage

The resin and hardeners described herein will have the stated shelf life provided these products are stored between 6 and 28°C, in a dry place and in tightly sealed containers, preferably in their original packaging.The products should be used within a temperature range of 18 to 25°C.

Handling

Our products are generally quite harmless to handle provided that certain precautions normally taken when handling chemicals are observed. The uncured materials must not, for instance, be allowed to come into contact with foodstuffs or food utensils, and measures should be taken to prevent the uncured materials from coming in contact with the skin, since people with particularly sensitive skin may be affected. The wearing of impervious rubber or plastic gloves will normally be necessary; likewise the use of eye protection. The skin should be thoroughly cleansed at the end of each working period by washing with soap and warm water. The use of solvents is to be avoided. Disposable paper - not cloth towels - should be used to dry the skin. Adequate ventilation of the working area is recommended. These precautions are described in greater detail in the Material Safety Data sheets for the individual products and should be referred to for fuller information.