RENGEL® SW 419-1 / REN® HV 2419

• Abrasion-resistant
• No sagging on vertical surfaces
• Low sedimentation
• Hard, yet easy-to-work surfaces

• Foundry equipment
• Sheet metal forming tools
• General model making applications

After curing: 7 days at room temperature / 14 hours at 40°C

The two components must be mixed thoroughly according to the specified mixing ratio. Apply the mixture in thin layers using a brush or spatula. Wait until the surface resin has gelled, but ensure it is still slightly tacky when proceeding with the next step. The final properties of the product will be improved by post-curing.

Storage

Provided that the products described in this manual (i.e., resin and hardener) are stored in a dry place, in their sealed original containers, at temperatures between 6 and 28°C, the shelf life corresponds to the specified values. The products should be processed within a temperature range of 20–25°C.

Handling

Our products can be processed safely, provided that the usual precautions for handling chemicals are observed. Keep uncured materials away from food. To avoid allergic reactions, it is strongly recommended to wear impervious rubber or plastic gloves and safety goggles. After each use, hands must be thoroughly washed with warm water and soap. Avoid the use of solvents. Afterwards, dry the skin with disposable paper towels – not textiles. The work area should be well ventilated; an exhaust system above the workstation may be required. A description of all precautionary measures is included in the safety data sheets for the individual products. We will be happy to send these to you upon request.