Enhanced TDS
Identification & Functionality
- Chemical Family
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Features
- Excellent high-temperature resistance.
- Variable curing speed control.
- Easy to apply, will not run down on vertical surfaces.
- Partial curing at room temperature combined with post-curing as indicated.
- Excellent interlayer adhesion.
Applications & Uses
- Product End Uses
- Markets
- Applications
- Application Information
- Due to a very long processing time, it allows for the manufacturing of very large tools.
- Tools requiring resistance up to 200°C.
- Fast, medium, and slow curing agents, corresponding to achieving comprehensive control.
- Pre-impregnated coating tools.
Technical Details & Test Data
- Mixed Ratio Information
Component Parts by weight RenGel® SW 5200 100 Ren® HY 5211 20 RenGel® SW 5200 100 Ren® HY 5212 20 Mix the two components thoroughly in the mixing ratio shown, then impregnate each ply as it is laid to build the laminate. Apply a thin layer with a brush or spatula before applying the backing structure and wait until the gel coat cures to the tacky stage. Post-curing is necessary to benefit the final properties.
- Cured Properties
Resin/hardener mixing: SW 5200 HE 5211 slow SW 5200 HE 5212 quick
Appearance black black Pot life at 25°C (Volume : 500ml ) 18 hours 10 hours Thin layer gelling time 24 hours 15 hours Thin layer tack time 48 hours 24 hours sticky time length 48 hours 24 hours - After curing: Curing at room temperature for 24 hours + curing at 40C for 12 hours .
- curing at 8O°C for 2 hours. +100℃ curing for 2 hours +120C curing for 2 hours +140C curing for 2 hours +160C
- curing for 2 hours +180C curing for 2 hours +200C curing for 12 hours, slowly cool to room temperature.
Density ISO 1183 g/cm 1.6 1.5 Hardness ISO 868 Shore D 90 D 90 D Bending stngth ISO 178 MPa 86 88 Flexural modulus ISO 178 MPa 5500 6500 Deformation temperature ISO 75 °C 195 198 Tg DSC °C 200 200 Impact strength Charpy Impact strength KJ / m2 3.9 5.2 wear Taber mm3/100u 45 - 50 45- 50
Packaging & Availability
- Packaging Information
Component Parts by weight RenGel® SW 5200 100 Ren® HY 5211 20 RenGel® SW 5200 100 Ren® HY 5212 20
Storage & Handling
- Storage and Handling Information
Storage
RenGel® SW 5200, Ren® HY 5211 and Ren® HY 5212 have a shelf life as indicated on the label if stored in properly closed original containers at the storage temperature indicated on the MSDS in a dry place. Containers should be closed immediately after use.
Handling
Disposal of our products is generally fairly harmless as long as common precautions for handling chemicals are taken. For example, uncured material should not come into contact with food or eating utensils, and precautions should be taken to prevent uncured material from coming into contact with skin, as sensitive skin may be affected. Impervious rubber or plastic gloves must usually be worn; eye protection is also required. Skin should be cleaned thoroughly with soap and warm water after each work session. Avoid the use of solvents. Skin should be dried with disposable paper towels – not towels. Adequate ventilation of the work area is recommended. These precautions are described in more detail in the Material Safety Data Sheets for each product, which should be consulted for more complete information.
Other
- Application Information
Value Units Test Method / Conditions Mix Ratio 0.2 %(W) %(W) Hardener (REN® HY 5211) : Resin Mix Ratio 0.2 %(W) %(W) Hardener (REN® HY 5212) : Resin