Enhanced TDS
Identification & Functionality
- Blend
- No
- Chemical Family
- Composite Materials Functions
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Key Features
- Low viscosity
- Latent at temperature up to 66°C (150°F)
- Long working time for mass infusion process
- Rapid cure at elevated temperatures
- Good adhesion to glass cloth, graphite and other reinforcements
Applications & Uses
- Composites End Use
- Composites Processing Methods
- Application Information
- Vacuum-Assisted Resin Transfer Molding (VARTM) of advanced composites
- Resin Transfer Molding (RTM)
- Seemans Composite Resin Injection Molding Process (SCRIMPSM)
Properties
- Physical Form
Regulatory & Compliance
Technical Details & Test Data
- Processing Guidelines
Curing condition Time, hours Temperature Option 1:
Self-supporting post cure10 - 16 93 °C (200 °F) Plus post cure 4 177 °C (350 °F) Option 2:
Curing4 121 °C (250 °F) Plus post cure 4 177 °C (350 °F) To determine whether cross-linking has been carried out to completion and optimal performance properties have been achieved, it is necessary to perform the relevant measurements on the actual part or to measure the glass transition temperature of the cured system. Different processing conditions and cure cycles in the customer’s manufacturing process could lead to a different degree of crosslinking hence, different glass transition temperatures.
- Laminate Lay-up for Infusion Process
- Panel Type: Approximately 2 ft. x 2 ft. (0.61m x 0.61m) flat panel
Laminate Thickness: 0.073 in. (1.8mm)Physical Property of Graphite Laminate Test Method Value Ultimate Flexural Strength, at 77°F (25°C), psi (MPa) ASTM D-790 98,611 (680) Flexural Modulus, at 77°F (25°C), psi (MPa) ASTM D-790 7.2×10⁶ (49,655) Ultimate Tensile Strength, at 77°F (25°C), psi (MPa) ASTM D-638 22,120 (152) Tensile Modulus, psi (MPa) ASTM D-638 2.1×10⁶ (14,482) Tg by DMA, E” peak, °F (°C) ASTM D-4065 305 (153) Ultimate Compressive Strength, at 77°F (25°C), psi (MPa) ASTM D-695 37,450 (258) Compressive Modulus, at 77°F (25°C), psi (MPa)
Izod Impact Strength, notched, ft.-lb./in. (J/m)ASTM D-695 11.0×10⁶ (75,862)
Packaging & Availability
- Regional Availability
Storage & Handling
- Storage Information
RENINFUSION 8610 should be stored in a dry place, in the sealed original containers, at temperatures between 2°C and 8°C (35.6°F and 46.4°F). Under these storage conditions the shelf life is 365 days. The products should not be exposed to direct sunlight.
Other
- Appearance
- Transparent
- Color (SDS)
- Clear
- Odor (SDS)
- Epoxy-Like
- Mechanical Properties
Value Units Test Method / Conditions Elongation 290.0 % % Flexural Strength 86.8 MPa MPa at 25°C Hardness 89.0 Shore D Shore D Tensile Strength 34.6 MPa MPa at 25°C - Physical Properties
Value Units Test Method / Conditions Density 1.2 g/cm³ g/cm³ Glass Transition Temperature (Tg) 137.0 °C °C Dynamic Mechanical Analysis (DMA) E" peak Glass Transition Temperature (Tg) 142.0 °C °C Thermomechanical Analyzer Viscosity 320.0-330.0 cPs cPs ASTM D2393 at 25°C Viscosity 320.0-330.0 cPs cPs ASTM D2393 at 52°C