Enhanced TDS
Identification & Functionality
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Features
- Exceptionally high temperature resistance
- Excellent fiber wet out due to low viscosity
- Excellent inter-laminar adhesion
Applications & Uses
- Composites Processing Methods
- Product End Uses
- Markets
- Applications
- Application Information
- High performance composite parts and tools
- Pre-preg tools
- Vacuum forming tools
- Foam molding tools
Properties
- Physical Form
Technical Details & Test Data
- Processing Information
Typical Cure Cycles
24 – 48 hours RT + 2 hours @ 104°F + 2 hours @ 140°F then equal stages to deflection temperature for 14 hours.
The optimum cure cycle has to be determined case by case depending on the processing and the economic requirements.
Storage & Handling
- Storage Conditions
RenLam® LY 5210 should be stored in a dry place, the sealed original container, away from heat and humidity, at temperatures between 2 - 8°C, (+35.6 to 46.4°F). Under these storage conditions, the shelf life is 3 years. The product should not be exposed to direct sunlight. Partly emptied containers should be closed immediately after use. Aradur® 2954 should be stored in a dry place, the sealed original container, away from heat and humidity, at temperatures between +2°C and +40°C (+35.6°F and +104°F). Under these storage conditions, the shelf life is 3 years. The product should not be exposed to direct sunlight.