RENLAM® LY 5210 / REN® HY 5213

• Good wetting properties
• Long pot life
• Partial curing at room temperature completed with indicated post cure
• Exceptional heat resistance

• For heat- resistant tools with glass or carbon fibre fabrics
• Pre-preg lay-up tools
• Parts and structures
• In combination with an appropriate gelcoat system to construct high temperature tools

Processing 

Mix the two components thoroughly in the ratio indicated, then impregnate each layer of cloth as it is laid up to construct the laminate. Post-curing will improve final properties.

Our products are generally quite harmless to handle provided that certain precautions normally taken when handling chemicals are observed. The uncured materials must not, for instance, be allowed to come into contact with foodstuffs or food utensils, and measures should be taken to prevent the uncured materials from coming in contact with the skin, since people with particularly sensitive skin may be affected. The wearing of impervious rubber or plastic gloves will normally be necessary; likewise the use of eye protection. The skin should be thoroughly cleansed at the end of each working period by washing with soap and warm water. The use of solvents is to be avoided. Disposable paper - not cloth towels - should be used to dry the skin. Adequate ventilation of the working area is recommended.

Provided that RenGel® SW 5210 and Ren® HY 5213 are stored in a dry place in their original, properly closed containers. Partly emptied containers should be closed immediately after use.The product should be used when in the temperature range 18-25°C.