RENPIM® 5222 Isocyanat / RENPIM® 5222 Polyol

• High Impact System
• Good Flexibility
• Black system
• Simulates high density polyethylene

• Parts In Minutes polyurethanes simulate the appearance and physical characteristics of engineering thermoplastics for prototyping and short production runs.
• They can be used to produce functional prototype parts suitable for use in all major industrial areas including automotive, aerospace, consumer goods, electronic and leisure applications.
• RENPIM® 5222 Isocyanat / RENPIM® 5222 Polyol is a black system, which simulates high-density polyethylene.
• It has high impact strength, and it is suitable for production of automotive and electronic parts.

After cure: 14 hours at 80°C or 7 days at 20-25°C

Processing

• Parts In Minutes polyurethanes are specifically formulated to be fast curing systems and therefore require processing via application equipment.
• Huntsman Advanced Materials are pleased to advise on all types of suitable dispensing and mixing equipment for the processing of these materials.
• Hand mixing or manual processing of these materials is not recommended. Thorough stirring to ensure uniform dispersion of materials is critical, prior to processing.

Moulds

• Huntsman Advanced Materials Parts In Minutes polyurethane systems are compatible with most major silicone supplier’s products.
• Huntsman Advanced Materials can also offer alternative polyurethane and epoxy materials for the production of moulds, with appropriate release agents.

Application equipment

• Huntsman Advanced Materials is able to recommend equipment suppliers and provide technical help and assistance with respect to selection and operation of application equipment.

Maintenance

• Maintenance and cleaning of equipment is expected to be minimal but daily cleaning of mixers may be necessary, depending on the type of mixer used.
• Huntsman Advanced Materials responsibility for the environment means we do not recommend the use of solvents for cleaning.
• Static mixers can be discarded directly when the product has gelled, and dynamic mixers should be flushed through with the pure polyol component.

Caution
Our products are generally quite harmless to handle provided that certain precautions normally taken when handling chemicals are observed. The uncured materials must not, for instance, be allowed to come into contact with foodstuffs or food utensils, and measures should be taken to prevent the uncured materials from coming in contact with the skin, since people with particularly sensitive skin may be affected. The wearing of impervious rubber or plastic gloves will normally be necessary; likewise the use of eye protection. The skin should be thoroughly cleansed at the end of each working period by washing with soap and warm water.

• Provided that RenPim® 5222 Isocyanat and RenPim® 5222 Polyol are stored in a dry place in their original, properly closed containers.
• Partly emptied containers should be closed immediately after use.

Our products are generally quite harmless to handle provided that certain precautions normally taken when handling chemicals are observed. The uncured materials must not, for instance, be allowed to come into contact with foodstuffs or food utensils, and measures should be taken to prevent the uncured materials from coming in contact with the skin, since people with particularly sensitive skin may be affected. The wearing of impervious rubber or plastic gloves will normally be necessary; likewise the use of eye protection. The skin should be thoroughly cleansed at the end of each working period by washing with soap and warm water.