XB 6078

The system allows the use of simple processing methods with very short cycle times.

• Thick wall technical parts, premium quality sports plates and casual and fashion footwear.

• Matrix system for reinforced parts: possibility to produce preimpregnated storage stable mats and fleeces.
• Binder for preforms.

• AVALON® 65 ABU JS is supplied pre-dried, however to ensure trouble-free processing it is preferable to dry before use.
• The recommended drying conditions are:
• 3 hours at 80-90°C in circulating air
• 3 hours at 70-80°C in dehumidified air
• Dew point : -30°C

First Aid :

• Contamination of the eyes by resin, hardener or mix should be treated immediately by flushing with clean, running water for 10 to 15 minutes. A doctor should then be consulted.
• Material smeared or splashed on the skin should be dabbed off, and the contaminated area then washed and treated with a cleansing cream (see above). A doctor should be consulted in the event of severe irritation or burns.
• Contaminated clothing should be changed immediately. Anyone taken ill after inhaling vapours should be moved out of doors immediately. In all cases of doubt call for medical assistance.

• AVALON® 65 ABU JS is supplied in bags, drums or octabins.
• AVALON® 65 ABU JS has a minimum expected shelf life of 12 months after shipment date.
• The product should be stored in a dry and cool place in the manufacturer ́s original packaging.

Storage :

• Provided the product is stored dry in its original, closed container at the mentioned temperature, it will have the shelf life indicated on the label.
• Partly emptied containers should be closed immediately after use.

Handling :

Forced ventilation and dust masks or respirators should be used to ensure that operatives do not breath in dust generated by the system.

Safety precautions at workplace :

• protective clothing : yes
• gloves :  essential
• arm protectors :  recommended when skin contact likely
• goggles/safety glasses : yes

Skin protection :

• before starting work  : Apply barrier cream to exposed skin
• after washing  : Apply barrier or nourishing cream

Cleansing of contaminated skin :

• Dab off with absorbent paper, wash with warm water and alkali-free soap, then dry with disposable towels. Do not use solvents

Disposal of spillage :

• Soak up with sawdust or cotton waste and deposit in plastic-lined bin

Ventilation :

• of workshop :  Renew air 3 to 5 times an hour
• of workplaces : Exhaust fans. Operatives should avoid inhaling vapours