Products

ARALDITE® AW 4825 / HARDENER HW 4826 is a two-component adhesive of high strength and toughness. It was especially developed for silicon wafer slicing, and its low viscosity and medium curing time make it suitable for both automated and manual bonding processes. Debonding can be done in weak acids or in hot water.

ARALDITE® CW 1195-1 Resin with ARADUR® HW 1196 Hardener is a prefilled casting resin system optimized for processing and curing at high temperatures to yield excellent temperature cycling resistance. This resin system is recommended for the manufacture of power semiconductors, thyristors/diode modules, or rectifier modules. The resin system can be processed by casting or vacuum casting.

ARALDITE® CW 1446 BDF / ARADUR® HY 2919-1 is a casting system exhibiting good impregnation capability.

AVALON® 65 DBU is a pellet-based plastic material used in aerospace and aviation, footwear, military and defense, and semiconductor manufacturing applications. It offers high performance and reliability in various demanding industrial processes, making it suitable for a wide range of uses in these sectors.

AVALON® 75 AEU is a pellet-based plastic material used in aerospace and aviation, footwear, military and defense, and semiconductor manufacturing applications. It offers high performance and durability, making it suitable for demanding industrial processes in these sectors.

AVALON® 85 AEU is a pellet-based plastic material used in aerospace and aviation, footwear, military and defense, and semiconductor manufacturing applications. It offers high-performance properties, making it suitable for demanding industrial processes across these sectors.

AVALON® 95 ABRU is a pellet-based plastic material used in aerospace and aviation, footwear, military and defense, and semiconductor manufacturing applications. It is insoluble in water, making it suitable for demanding industrial processes where durability and reliability are required.

AVALON® 95 AEU is a pellet-based plastic material used in aerospace and aviation, footwear, military and defense, and semiconductor manufacturing applications. It offers high-performance properties, making it ideal for demanding industrial processes in these sectors.

Aminoethylpiperazine - HP (AEP - HP) is a cyclic ethylene amine. It contains one primary, one secondary, and one tertiary amine. AEP is a single-component product that is clear, colorless, and has an ammonia-like odor.

Aminopropylmonomethylethanolamine (APMMEA) is a clear, low viscosity liquid with a high flash point and mild odor. It provides optimum pH control, emulsion stability, and enhanced pigment dispersion, making it ideal for low odor paint formulations. Its low freezing point (-40°C) improves freeze-thaw stability.

E-GRADE® Choline Hydroxide is a clear aqueous solution with a high pH and a mild odor. It has a very low corrosion rate on copper and other metallic surfaces and has been demonstrated to effectively remove both positive and negative photoresists. The product is an effective replacement for TMAH and is available in higher concentrations than TMAH in both water and organic solvents (for R&D). The combination of low corrosion rates, photoresist removal, etching, and lower toxicity makes E-GRADE® Choline Hydroxide an effective, safer-to-handle alternative to TMAH in next-generation semiconductor cleans, with performance enhancements such as faster photoresist removal rates and selective metal removal rates.

Diethylenetriamine (DETA) is a linear ethyleneamine containing two primary nitrogens and one secondary nitrogen. DETA is a single-component product that is clear and colorless, with an ammonia-like odor.

Diglycolamine® Agent (DGA® Agent) is slightly viscous liquid with a mild amine odor. DGA agent is miscible with water, alcohols, and aromatic hydrocarbons, but is relatively immiscible with aliphatic hydrocarbons and ethyl ether. The product is isomeric with diethanolamine; however, the primary amine group makes it more reactive.

E-GRADE® 1,3-dimethyl-2-imidazolidinone (E-GRADE® DMEU) is primarily used in stripping, cleaning, and wet etching formulations in the semiconductor, display, and PCB industries.

E-GRADE® 3-methyl-2-oxazolidinone (E-GRADE® MEOX) is primarily used in stripping, cleaning, and wet etching formulations in the semiconductor, display, and PCB industries.