Products

AGOMET® F 305 A/B is a low-viscosity, two-component, room-temperature curing, "no mix" methacrylate adhesive suitable for bonding metals and plastics. The high cure rate of this product at room temperature allows it to cure bonded parts in a short time. The adhesive has an assembly time of 1 - 2 minutes, and after 5 minutes, the bonded parts are cured and will reach their final cured strength within 24 hours. Bonds made with AGOMET® F 305 A/B exhibit excellent tensile shear strength, peel strength, as well as excellent moisture and heat resistance.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

AGOMET® F 307 A/B is a two-component, room-temperature curing, "no-mix" methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has an assembly time of 3 minutes. As early as 8 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 2 hours. Bonds produced with AGOMET® F 307 A/B have less shrinkage during curing than most other AGOMET® F series.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

AGOMET® F 330 / HARDENER Lacquer 2 is a "no-mix" room-temperature curing methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has an assembly time of 10 minutes. As early as 20 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 2 hours. Bonds produced with AGOMET® F 330 / HARDENER Lacquer 2 show good tensile shear and peel strengths, as well as good temperature resistance.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

AGOMET® F 330 / HARDENER Paste is a room-temperature curing methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has a pot life of approximately 10 minutes. As early as 20 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 2 hours. Bonds produced with AGOMET® F 330 / HARDENER Paste show good tensile shear and peel strengths, as well as good temperature resistance. The product can fill gaps of up to 5mm.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

AGOMET® F 330 / HARDENER Powder with hardener powder or hardener paste is a room-temperature curing methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has a pot life of approximately 10 minutes. As early as 20 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 2 hours. Bonds produced with AGOMET® F 330 / HARDENER Powder show good tensile shear and peel strengths, as well as good temperature resistance. The product can fill gaps of up to 5mm.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2021-1 A/B is a two-component, room temperature curing, methacrylate-based, general-purpose adhesive for rapid assembly operations with a wide variety of substrates.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2021-2 A/B is a two-component, room-temperature curing methacrylate general-purpose adhesive for rapid assembly operations on a wide range of substrates.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2022-1 A/B is a two-component, room temperature curing, methacrylate adhesive for fast assembly operations on a wide range of substrates, including those which can be “difficult to bond.”

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2023-10 A/B is a two-component, room-temperature curing, flexible methacrylate adhesive with an open time of 10 minutes. It is a thixotropic paste that can fill gaps up to 30 mm. This adhesive is ideal for bonding composites in the manufacturing of large structures.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2023-30 A/B is a two-component, room temperature curing, flexible, methacrylate adhesive with an open time of 30 minutes. It is a thixotropic paste that can fill gaps up to 30 mm. This adhesive is ideal for bonding composites in the manufacturing of large structures.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2023-60 A/B is a two-component, room temperature curing, flexible, methacrylate adhesive with an open time of 60 minutes. It is a thixotropic paste that can fill gaps up to 30 mm. This adhesive is ideal for bonding composites in the manufacturing of large structures.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2047-1 A/B is a cold curing two-part methacrylate adhesive for metal and plastic bonding. Depending on the method of processing, ARALDITE® 2047-1 A/B fills joints up to a gap width of approximately 5mm. With many bonds, an expensive pretreatment of the parts to be joined is not necessary, or can be reduced to a minimum. The adhesive can be processed at temperatures up to 40°C. Higher temperatures shorten the setting time.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2048-1 A/B is a two-component, room-temperature curing, flexible methacrylate adhesive. It is a fast-setting product, ideal for bonding and repair on metals, composites, and thermoplastics.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2051 A/B is a fast curing, two-part methacrylate adhesive designed to accelerate structural bonding operations while providing high toughness and resilience to vibrations, impact, and dynamic loading.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2053-05 A/B is a two-part toughened methacrylate adhesive designed for structural bonding. With an open time of 5 minutes, it offers high elongation at break and excellent resistance to aging and weathering, making it ideal for bonding metals, composites, and plastics in the transportation industry.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.