Products

AGOMET® F 305 A/B is a low-viscosity, two-component, room-temperature curing, "no mix" methacrylate adhesive suitable for bonding metals and plastics. The high cure rate of this product at room temperature allows it to cure bonded parts in a short time. The adhesive has an assembly time of 1 - 2 minutes, and after 5 minutes, the bonded parts are cured and will reach their final cured strength within 24 hours. Bonds made with AGOMET® F 305 A/B exhibit excellent tensile shear strength, peel strength, as well as excellent moisture and heat resistance.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

AGOMET® F 330 / HARDENER Paste is a room-temperature curing methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has a pot life of approximately 10 minutes. As early as 20 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 2 hours. Bonds produced with AGOMET® F 330 / HARDENER Paste show good tensile shear and peel strengths, as well as good temperature resistance. The product can fill gaps of up to 5mm.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 12041 A/B is a two-component epoxy resin casting system. It is transparent after curing and offers superior crack resistance for optoelectronic devices, especially for tip light-emitting diodes (LEDs).

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 13014 A/B is a two-component epoxy resin casting system. Transparent after curing, it offers superior crack resistance for optoelectronic devices, especially for tip light-emitting diodes (LEDs).

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 1570 FST A/B is a halogen-free two-component epoxy adhesive. It is designed for aerospace applications that require flame-retardant properties, with its first application being PE foam to phenolic GRP bonding in cargo areas.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 1641 A/B is an ultra-low-density syntactic designed to have a reduced tendency to crack in high-stress applications. It is available in semkits for easy application and is non-flowing when applied.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2013-1 A/B is a two-component, room temperature curing paste adhesive with high strength and toughness. It is thixotropic with good environmental and chemical resistance. Although it is designed as a metal bonding adhesive, it is also suitable for bonding other materials such as ceramics, glass, rubbers, rigid plastics, and a wide variety of other materials in common use.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2014-2 A/B is a two-component, room temperature curing, thixotropic paste adhesive of high strength with good environmental and excellent chemical resistance. It is used for bonding metals, electronic components, GRP structures, and many other items where higher-than-normal temperatures or more aggressive environments are encountered in service.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2015-1 A/B is a two-component, room temperature curing, pale-colored, lightly thixotropic liquid polyurethane adhesive for thermoplastic bonding.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2018 A/B is a two-component, room temperature curing, pale-colored, lightly thixotropic liquid polyurethane adhesive for thermoplastic bonding.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2021-1 A/B is a two-component, room temperature curing, methacrylate-based, general-purpose adhesive for rapid assembly operations with a wide variety of substrates.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2031-1 A/B is a two-component, room temperature curing adhesive that can be used for resilient bonding applications. ARALDITE® 2031-1 adhesive is thixotropic and non-sagging up to 10 mm thickness, making it suitable for GRP, CFRP, and SMC bonding.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2033 A/B is a room temperature curing, self-extinguishing epoxy adhesive. It has been tested against stringent norms for electronics and railway applications. This adhesive has well-balanced tensile properties: a medium modulus and a high elongation at break. It is suitable for structural applications requiring high strength.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 403 A/B is a two-pack cold-curing structural adhesive system developed primarily for use in riveted joints to provide improved fatigue resistance. It also offers the benefits of bonded assembly for structural joints that cannot be bonded with hot-cured adhesives due to their size or other physical limitations. It is also suitable for honeycomb-to-skin bonding.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® AV 5308 / HARDENER HV 5309-2 is a two-component, room-temperature curing paste adhesive that provides a resilient bond. It is thixotropic and non-sagging up to a 10mm thickness. It is particularly suitable for SMC and GRP bonding.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.