Products

Huntsman

Matching Product Technologies (5)

Elastomers

Plastics

CASE

Base Chemicals & Intermediates

Base Chemicals & Intermediates

Composite Materials

31 Products found on Huntsman

HuntsmanEpoxy Curing Agent ECA 29

Functions:Curing Agent, Curing Agent, Curing Agent, Intermediate
Chemical Family:Epoxy & Epoxy Derivatives
End Uses:Composites, Industrial Castings, Sheets
Compatible Polymers & Resins:Epoxies (EP)
Processing Methods:Casting

Epoxy Curing Agent ECA 29 is a mixture of aliphatic polyamines derived from ethylenediamine and has an AHEW (amine-hydrogen equivalent weight) in the range of 36-38. Consisting of higher oligomers of TETA (triethylenetetramine), Epoxy Curing Agent ECA 29 amine may be particularly useful as an epoxy curing agent in applications where higher Tg (glass transition temperature) and reasonably fast reactivity are needed with longer pot-life than DETA or TETA hardeners. As illustrated by the following figure, the increasingly fast gel times with standard bisphenol A based epoxies of the ethyleneamine series EDA (AHEW = 15.03), DETA (AHEW = 20.6), and TETA (AHEW = 24.4) are attributable to their increasing functionality and to them being aliphatic amines. For these three amines, the gel times shorten through the series, even though their AHEWs are increasing, which decreases the concentration of reactants in stoichiometric mixtures. As might be expected, the amines with higher AHEW, and therefore lower amine group concentrations in the formulations, have somewhat lower maximum exotherm temperatures. Epoxy Curing Agent ECA 29 amine follows this trend of having a slightly lower exotherm temperature, however it provides a longer working time until gelation than do the lower functionality amines DETA or TETA. This is attributed to the higher proportion of secondary amino groups in this product. The high functionality of this amine also increases the level of crosslinking in the fully cured epoxy, resulting in a relatively high Tg of 143°C.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

HuntsmanIROGRAN® A 60 E 4902 N

Polymer Name:Thermoplastic Polyurethane (Polyester based)
Processing Methods:Extrusion, Injection Molding
End Uses:Film, Sheets
Density::1140.0~1140.0

IROGRAN® A 60 E 4902 N is a polyester-based Thermoplastic Polyurethane (TPU) designed for extrusion and injection molding applications. It offers key features such as being plasticizer-free, improved UV stability, excellent wear performance, good low-temperature performance, high elasticity, high recovery, and a rubber-like feel.

HuntsmanIROGRAN® A 60 E 6038

Polymer Name:Thermoplastic Polyurethane (Polyester based)
Processing Methods:Calendering, Extrusion
End Uses:Adhesive Tape, Film, Sheets
Density::1140.0~1140.0

IROGRAN® A 60 E 6038 is a polyester-based thermoplastic polyurethane (TPU) for extrusion applications. Key features include plasticizer-free, improved UV stability, hydrolytically stabilized, low hardness and modulus, excellent multilayer bonding, high elasticity, and high recovery.

HuntsmanIROGRAN® A 80 P 4699 L

Polymer Name:Thermoplastic Polyurethane (Polyether based)
Processing Methods:Extrusion, Injection Molding
End Uses:Barrier Films, Bladders, Emblems, Film, Footwear, Hoses, Labels, Roofing Membranes, Sheets, Spiral Tubes, Thick-Walled Parts, Water Tanks
Density::1090.0~1090.0

IROGRAN® A 80 P 4699L is a polyether-based thermoplastic polyurethane (TPU) for extrusion and injection molding applications. Key features include excellent hydrolysis and microbial resistance, good oil and solvent resistance, good low-temperature performance, high elasticity, and robust processing.

HuntsmanIROGRAN® A 80 P 5039

Polymer Name:Thermoplastic Polyurethane (Polyether based)
Processing Methods:Extrusion, Injection Molding
End Uses:Cable Jacketing, Film, Hoses, Sheets, Thick-Walled Extrusion Profile
Density::1100.0~1100.0

IROGRAN® A 80 P 5039 is a polyether-based thermoplastic polyurethane (TPU) for extrusion and injection molding applications. It offers excellent hydrolysis and microbial resistance, low hardness and modulus, good low-temperature performance, robust processing, and high transparency.

HuntsmanIROGRAN® A 80 P 5039 FCM

Polymer Name:Thermoplastic Polyurethane (Polyether based)
Processing Methods:Extrusion, Injection Molding
End Uses:Cable Jacketing, Conveyor Belt, Film, Hoses, Sheets, Spiral Tubes, Thick-Walled Parts, Thin-walled Parts
Density::1100.0~1100.0

IROGRAN® A 80 P 5039 FCM is a food contact approved polyether-based Thermoplastic Polyurethane (TPU) for extrusion and injection molding applications. Key features are excellent hydrolysis and microbial resistance, low hardness and modulus, excellent wear performance, good low temperature performance, high elasticity, robust processing and high transparency.

HuntsmanIROGRAN® A 85 P 4394 FCM

Polymer Name:Thermoplastic Polyurethane (Polyether based)
Processing Methods:Extrusion, Injection Molding
End Uses:Cable Jacketing, Film, Hoses, Sheets, Spiral Tubes, Thick-Walled Extrusion Profile, Thin-walled Parts
Density::1120.0~1120.0

IROGRAN® A 85 P 4394 FCM is a food contact approved polyether-based thermoplastic polyurethane (TPU) for extrusion and injection molding applications. It offers excellent hydrolysis and microbial resistance, excellent wear performance, robust processing, and a glossy surface.

HuntsmanIROGRAN® A 85 P 4394 HR

Polymer Name:Thermoplastic Polyurethane (Polyether based)
Processing Methods:Extrusion
End Uses:Cable Jacketing, Film, Hoses, Sheets, Spiral Tubes, Thin-walled Parts

IROGRAN® A 85 P 4394 HR is a polyether-based thermoplastic polyurethane (TPU) for blown film extrusion. Key features include excellent hydrolysis and microbial resistance, excellent wear performance, robust processing, high melt stability, and a glossy surface.

HuntsmanIROGRAN® A 85 P 4394 HR FCM

Polymer Name:Thermoplastic Polyurethane (Polyether based)
Processing Methods:Extrusion, Injection Molding
End Uses:Cable Jacketing, Film, Hoses, Sheets, Spiral Tubes, Thick-Walled Extrusion Profile, Thin-walled Parts

IROGRAN® A 85 P 4394 HR FCM is a food-contact approved polyether-based thermoplastic polyurethane (TPU) for extrusion and injection molding applications. Key features include excellent hydrolysis and microbial resistance, excellent wear performance, robust processing, and a glossy surface.

HuntsmanIROGRAN® A 85 P 4394 UV

Polymer Name:Thermoplastic Polyurethane (Polyether based)
Processing Methods:Extrusion, Injection Molding
End Uses:Cable Jacketing, Film, Hoses, Sheets, Spiral Tubes, Thick-Walled Extrusion Profile, Thick-Walled Parts
Density::1120.0~1120.0

IROGRAN® A 85 P 4394 UV is a polyether-based thermoplastic polyurethane (TPU) for extrusion and injection molding applications. Key features include excellent hydrolysis and microbial resistance, improved UV stability, excellent wear performance, and a glossy surface.

HuntsmanIROGRAN® A 85 P 4441

Polymer Name:Thermoplastic Polyurethane (Polyether based)
Processing Methods:Extrusion, Injection Molding
End Uses:Cable Jacketing, Film, Sheets, Thick-Walled Extrusion Profile, Thick-Walled Parts
Density::1110.0~1110.0

IROGRAN® A 85 P 4441 is a polyether-based Thermoplastic Polyurethane (TPU) for extrusion and injection molding applications. Key features are excellent hydrolysis and microbial resistance, excellent wear performance, robust processing and matte surface.

HuntsmanIROGRAN® A 85 P 5115 UV H FCM

Polymer Name:Thermoplastic Polyurethane (Polyether based)
Processing Methods:Calendering, Extrusion
End Uses:Cable Jacketing, Film, Hoses, Sheets, Spiral Tubes, Thick-Walled Extrusion Profile, Thick-Walled Parts

IROGRAN® A 85 P 5115 UV H FCM is a food-contact approved polyether-based thermoplastic polyurethane (TPU) for extrusion and injection molding applications. Key features include excellent hydrolysis and microbial resistance, improved UV stability, excellent wear performance, and a glossy surface.

HuntsmanIROGRAN® A 92 E 4860

Polymer Name:Thermoplastic Polyurethane (Polyester based)
Processing Methods:Extrusion, Injection Molding
End Uses:Film, Pneumatic Tube Applications, Sheets, Thick-Walled Extrusion Profile
Density::1190.0~1190.0

IROGRAN® A 92 E 4860 is a polyester-based Thermoplastic Polyurethane (TPU) for extrusion and injection molding applications. Key features are hydrolytically stabilized, abrasion resistance, excellent wear performance, resistance to dynamic stress, high elasticity, short cycle times and high melt stability.

HuntsmanIROGRAN® A 92 P 4207

Polymer Name:Thermoplastic Polyurethane (Polyether based)
Processing Methods:Extrusion, Injection Molding
End Uses:Cable Jacketing, Film, Pneumatic Tube Applications, Sheets, Spiral Hose, Thick-Walled Extrusion Profile
Density::1140.0~1140.0

IROGRAN® A 92 P 4207 is a polyether-based Thermoplastic Polyurethane (TPU) for extrusion and injection molding applications. Key features are excellent hydrolysis and microbial resistance, good low temperature performance, short cycle times, high melt stability and a glossy surface.

HuntsmanIROGRAN® A 92 P 4637

Polymer Name:Thermoplastic Polyurethane (Polyether based)
Processing Methods:Extrusion, Injection Molding
End Uses:Cable Jacketing, Film, Sheets, Spiral Hose, Thin-Walled Extrusion Profile
Density::1140.0~1140.0

IROGRAN® A 92 P 4637 is a polyether-based Thermoplastic Polyurethane (TPU) for extrusion and injection molding applications. Key features are excellent hydrolysis and microbial resistance, excellent wear performance, good low temperature performance, robust processing, high melt stability and glossy surface.

Show

of 31 results