Products

ARALDITE® AV 8504 / TDT 177-27 is an aerospace adhesive used in panel pin bonding. ARALDITE® AV 8504 Resin / TDT 177-27 Hardener epoxy adhesive is a two-component system that provides good sag resistance, high bond strength, and toughness. It can be cured at room temperature or elevated temperatures. ARALDITE® AV 8504 Resin / TDT 177-27 Hardener epoxy adhesive provides good adhesion properties to a wide variety of substrates and resilient bondlines once fully cured.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® AW4858 / Hardener HW4858 is a two-component epoxy adhesive system with very high lap shear and peel strength. It bonds a wide variety of materials, including metal, composite, and thermoplastics. The adhesive offers good moisture resistance, extreme toughness, and resilience, with a long pot life, making it ideal for large composite part assemblies.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

DALTOPIR® HFR is commonly used in combination with SUPRASEC® 2085 polymeric MDI, to produce PIR foam for the manufacturing of composite panels by a continuous lamination process. When using DALTOPIR® polyol formulated system, panel producers can achieve a smooth PIR foam processing. Combined with a suitable process and panel design, the resulting composite panel with this specific PIR foam core helps panel producers to achieve both Reaction to fire and Resistance to fire classifications. Foam made with DALTOPIR® HFR 33354 polyol formulated system can be used for thicknesses ranging from 30 mm up to 200 mm, for both wall and roof profiles. To ensure long term adhesion and durability, the use of a primer is required.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

EPOCAST® 1618-D / B epoxy syntactic is a low-density, flame-retardant compound for potting fasteners in honeycomb structures. The lightweight epoxy is easy to extrude through a 1/8 in (3 mm) nozzle orifice but is non-flowing after application. Epocast® 1618 D/B epoxy syntactic sets quickly at room temperature and is qualified to BMS 5-28, Type 18, Class 1. It is the suggested alternative for the discontinued Epocast® 1616 A/B epoxy syntactic, Epocast® 1618 A/B epoxy syntactic, and Epocast® 1620 A/B epoxy syntactic systems.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

I-BOND® MDF FC 4392 is an emulsifiable resin used as the sole resin in producing standard or special quality MDF. It provides a stable emulsion for up to 2 hours and helps reduce the risk of blow line blockage.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

I-BOND® MDF PM 4390 is a standard polymeric MDI resin used as the sole resin in producing standard or special quality MDF. It forms a stable emulsion for up to 2 hours and helps reduce the risk of blow line blockage.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

I-BOND® MDF PM 4394 is a polymeric fast cure MDI resin for dry blending. It can be used as the sole resin in producing standard or special quality MDF. The emulsifiable resin provides a stable emulsion for up to 2 hours and reduces the risk of blow line blockage.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

JEFFOL® R-425 X Polyol is an aromatic amino polyol with a high inherent reactivity and surfactant properties. JEFFOL® R-425X Polyol can be used in spray rigid foams as well as panel applications and with a wide range of components, including polyester-based polyols.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

JEFFOL® SD-441 is a liquid industrial additive used in automotive, building and construction, and cold-chain and insulation applications. It is ideal for use in panels and rigid foam formulations, offering blend compatibility, high reactivity, and improved flow properties to enhance performance in these products.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

RENINFUSION® 8610 is a low viscosity, single-component epoxy resin system designed for advanced composites. It offers excellent processability with low mixed viscosity and wet-out properties, ideal for injection or infusion processes in making panels up to one inch thick.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

RIMLINE® HC is a polyurethane resin system developed for interior sandwich components with a paper honeycomb core (HC), such as load floors and interior trims.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

RIMLINE® LFI (Long Fiber Injection) resin is a polyurethane-based, two-component system, developed for use as a core material in the manufacture of lightweight sandwich composite structures. Providing structural support for heavy duty applications, RIMLINE® LFI core system can be overmolded with VITROX® and RIMLINE® resin systems. Using RIMLINE® LFI resin molded core parts can result in thinner panels with improved damage tolerance for load-bearing applications including EV battery protection panels and enclosures.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

TEROL® 1326 is designed for use in plastics and elastomers, specifically in the production of panels and rigid foams. It functions effectively as a resin, providing durability and performance in various applications.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

TEROL® 1465 is designed for use in plastics and elastomers, specifically for panels and spray foams. It features enhanced physical properties, excellent substrate adhesion, good weather stability, low viscosity, and superior fire performance, functioning effectively as a resin in various applications.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

TEROL® 198 is compatible with polyurethanes (PU) and is designed for use in plastics and elastomers, specifically for panels and rigid foams. It features low hydroxyl content and functions effectively as a resin, providing enhanced performance in various applications.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.