Products

AGOMET® F 305 A/B is a low-viscosity, two-component, room-temperature curing, "no mix" methacrylate adhesive suitable for bonding metals and plastics. The high cure rate of this product at room temperature allows it to cure bonded parts in a short time. The adhesive has an assembly time of 1 - 2 minutes, and after 5 minutes, the bonded parts are cured and will reach their final cured strength within 24 hours. Bonds made with AGOMET® F 305 A/B exhibit excellent tensile shear strength, peel strength, as well as excellent moisture and heat resistance.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2013-1 A/B is a two-component, room temperature curing paste adhesive with high strength and toughness. It is thixotropic with good environmental and chemical resistance. Although it is designed as a metal bonding adhesive, it is also suitable for bonding other materials such as ceramics, glass, rubbers, rigid plastics, and a wide variety of other materials in common use.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® CT 2200 / ARADUR® HT 903 / Mineral Filler is a solid, hot-curing casting resin system for producing castings with good electrical and mechanical end-properties.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® CW 1116-1 / ARADUR® HY 2123 is a casting system with excellent winding impregnation characteristics.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® CW 1116-1 / ARADUR® HY 2919 is a casting system with excellent winding impregnation characteristics. It is suitable for applications in power diodes, rectifiers, and power systems. ARALDITE® CW 1116-1 is a modified, solvent-free epoxy resin containing mineral filler, while ARADUR® HY 2919 is a low-viscosity, accelerated anhydride hardener. Viscosity at 25°C (ISO).

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® CW 1116-1 / ARADUR® XW 1257-1 is a filled casting resin system with excellent winding impregnation characteristics for processing and curing at high temperatures.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® CW 1302 / ARADUR® HY 1300 is an optimally filled casting system for processing and curing at room temperature or slightly higher temperatures.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® CW 1304 / ARADUR® HY 1300 is an optimally filled casting system for processing and curing at room temperature or slightly higher temperatures.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® CW 1446 BDF / ARADUR® HY 2918 / ACCELERATOR DY 062 is a casting system exhibiting good impregnation capability.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® CW 2243 L Grey / ARADUR® HY 842 is an optimally filled casting system for processing and curing at room temperature or slightly higher temperatures.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® CW 2243-1 / ARADUR® HY 842 is an optimally filled casting system for processing and curing at room temperature or slightly higher temperatures.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® CW 2243-1L / ARADUR® HY 842 is an optimally filled casting system for processing and curing at slightly higher temperatures.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® CW 2245 / ARADUR® HY 956 is an optimally filled casting system for processing and curing at room temperature or slightly higher temperatures. ARALDITE® CW 2245 is a modified, solvent-free epoxy resin containing an inorganic filler. ARADUR® HY 956 is a low-viscosity polyamine hardener.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® CW 229 / ARADUR® HW 229 can be used in all insulation components of motors and generators due to their high mechanical strength, strong adhesion to various metals and substrates, and excellent dielectric properties. The low resin viscosity ensures homogeneous impregnation. The materials have very high temperature resistance and withstand extreme thermal cycling in service. The trend toward increased power output, higher integration density, and decreased size for generators and motors requires thermal management. Our heat-conductive products are the ideal solution to dissipate the heat.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® CW 229-3 / ARADUR® HW 229-1 is a liquid, brown, hot-curing two-component epoxy casting system with excellent crack resistance. It is prefilled with slightly abrasive, mechanically reinforcing fillers.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.