19 Products found on Huntsman
ARALDITE® 1570 FST A/B is a halogen-free two-component epoxy adhesive. It is designed for aerospace applications that require flame-retardant properties, with its first application being PE foam to phenolic GRP bonding in cargo areas.
The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.
The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.
Araldite® 2015-1 L is a two-component room temperature curing, resilient paste adhesive that is thixotropic and anti-sagging up to 10mm thick. It is commonly used for bonding sheet membrane plastics (SMC) and glass fiber reinforced plastics (GRP) materials.
ARALDITE® AV 111 / HARDENER HV 111 Normal is a two-component, room-temperature curing epoxy adhesive. It is particularly recommended as a bonding agent for external reinforcement (steel plate stiffeners to concrete/steel structural members), anchoring grout for reinforcing steel and prestressing cables in concrete and rock, repairing material for concrete cracks, and dry-fixing curtain walls.
ARALDITE® CW 5801-1 / ARADUR® HY 5801 is a two-component, epoxy-based potting and encapsulating system. ARALDITE® CW 5801-1 / ARADUR® HY 5801 is a 100% solids (no solvent) two-component, epoxy-based potting and encapsulating system designed especially for applications requiring very low shrinkage and excellent dielectric characteristics. Although the system will gel at room ambient temperature, an additional short elevated temperature post-cure is recommended to achieve optimal properties. This product is recommended for the encapsulation of electrical and electronic components.
ARALDITE® F 365 A / AGOMET® F305 B / HARDENER Powder / Paste is a low viscosity two component, room temperature curing, “No-mix” methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has an assembly time of 1 - 2 minutes. As early as 5 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 24 hours. Bonds produced with Araldite® F365A and Agomet® F305B show good tensile shear and outstanding peel strengths as well as good moisture resistance.
AVALON® 60 DB is a polyester-based Thermoplastic Polyurethane (TPU) for injection moulding and part of the AVALON Perform Range. Key features are abrasion resistance, cut and scratch resistance, excellent multilayer bonding and short cycle times.
AVALON® 65 DB is a polyester-based Thermoplastic Polyurethane (TPU) for injection moulding and part of the AVALON Perform Range. Key features are abrasion resistance, cut and scratch resistance, excellent multilayer bonding, good low temperature performance and short cycle times.
AVALON® 85 AB is a polyester-based Thermoplastic Polyurethane (TPU) for injection moulding and part of the AVALON Perform Range. Key features are abrasion resistance, cut and scratch resistance, excellent multilayer bonding and short cycle times.
AVALON® 85 AB DI is a polyester-based Thermoplastic Polyurethane (TPU) designed for injection molding and part of the AVALON Perform Range. Key features include abrasion resistance, cut and scratch resistance, excellent multilayer bonding, and short cycle times.
AVALON® 85 ABU is a polyester-based Thermoplastic Polyurethane (TPU) for injection molding applications. Key features are UV resistance, abrasion resistance, cut and scratch resistance, excellent multilayer bonding, excellent wear performance, good low temperature performance and short cycle times.
AVALON® 90 AB is a polyester-based Thermoplastic Polyurethane (TPU) for injection moulding and part of the AVALON Perform Range. Key features are abrasion resistance, cut and scratch resistance, excellent multilayer bonding, good low temperature performance and short cycle times.
AVALON® 90 ABU is a polyester-based Thermoplastic Polyurethane (TPU) for injection moulding and part of the AVALON Perform Range. Key features are improved UV stability, abrasion resistance, cut and scratch resistance, excellent multilayer bonding, good low temperature performance and short cycle times.
AVALON® 95 AE is a polyester-based thermoplastic polyurethane (TPU) for injection molding and is part of the AVALON Perform Range. Key features include abrasion resistance, cut and scratch resistance, excellent surface definition, and durability.
AVALON® 95 AB is a polyester-based thermoplastic polyurethane (TPU) for injection molding and is part of the AVALON Perform Range. Key features include abrasion resistance, cut and scratch resistance, excellent multilayer bonding, good low-temperature performance, and short cycle times.
AVALON® 95 ABR is a polyester-based thermoplastic polyurethane (TPU) for injection molding and is part of the AVALON Perform Range. Key features include abrasion resistance, cut and scratch resistance, good low-temperature performance, and short cycle times.
Show
of 19 results
