Products

Huntsman

Matching Product Technologies (4)

Elastomers

28 Products found on Huntsman

HuntsmanARALDITE® 2022-1 A/B

RTU Product Type:2K (2 component) Adhesive, Structural Adhesive
Product End Uses:Automotive Headlamps, Automotive Lighting, Boats, Camera Applications, Radar, Reflectors, Shelves, Toilets, Wind Mill Blades, Windscreens
Material Compatibility:Acrylic Substrates, Aluminum Substrate, Glass Substrate, Metal Substrate, Plastics Substrate, Polycarbonate (PC) Substrate, Polyvinyl Chloride (PVC) Substrate, Steel Substrate, Thermoplastic Substrate
Chemical Family:Methacrylates
Product Features:Excellent Environmental Resistance, Excellent Transparency Properties, Fast Curing, Good Elongation, Good Gap Filling Capabilities, Good Toughness, High Lap Shear Strength, High Resilience, Low Fogging, Medium Open Time, Non-Sagging

ARALDITE® 2022-1 A/B is a two-component, room temperature curing, methacrylate adhesive for fast assembly operations on a wide range of substrates, including those which can be “difficult to bond.”

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

HuntsmanARALDITE® LY 3585 / ARADUR® 3475

RTU Product Type:Resin System (Unspecified)
Chemical Family:Epoxy & Epoxy Derivatives
Processing & Application Methods:Resin Transfer Molding (RTM), Wet Compression Molding
Product Features:Excellent Transparency Properties, Fast Cure, Good Printability, Low Color Formation

ARALDITE® LY 3585 / ARADUR® 3475 is a resin technically identical to ARALDITE® LY 3585 and is distinguished by its associated REDcert2 certificate ensuring that 100% of the fossil raw materials required for the production of this product were replaced by sustainably certified biomass. In the rest of this document, ARALDITE® LY 3585 refers indifferently to both resins. ARADUR® 3475 is an amine hardener. It is also mass production of Automotive composites including visible parts.

ARALDITE® LY 3585 MBC / ARADUR® 3475 banner

HuntsmanARALDITE® LY 3585 MBC / ARADUR® 3475

RTU Product Type:Resin System (Unspecified)
Chemical Family:Epoxy & Epoxy Derivatives
Processing & Application Methods:Resin Transfer Molding (RTM), Wet Compression Molding
Product Features:Excellent Transparency Properties, Fast Cure, Low Color Formation

ARALDITE® LY 3585 MBC / ARADUR® 3475 is a resin technically identical to ARALDITE® LY 3585 and is distinguished by its associated REDcert2 certificate ensuring that 100% of the fossil raw materials required for the production of this product were replaced by sustainably certified biomass. In the rest of this document, ARALDITE® LY 3585 refers indifferently to both resins. ARADUR® 3475 is an amine hardener. Mass production of Automotive composites including visible parts.

HuntsmanAVALON® 95 AHT

Polymer Name:Thermoplastic Polyurethane (Polyester based)
Processing & Application Methods:Injection Molding
Product End Uses:Footwears, General Purpose, Plates
Density:1210.0 kg/m³

AVALON® 95 AHT is a polyester-based thermoplastic polyurethane (TPU) for injection molding and is part of the AVALON Crystal Range. Key features include UV resistance, abrasion resistance, durability, and high transparency.

HuntsmanIROGRAN® A 70 H 4673 N

Polymer Name:Thermoplastic Polyurethane (Polyester based)
Processing & Application Methods:Injection Molding
Product End Uses:Thick-Walled Parts, Thin-Walled Parts
Density:1160.0 kg/m³

IROGRAN® A 70 H 4673 N is a polyester-based thermoplastic polyurethane (TPU) for injection molding applications. Key features include phthalate-free, excellent wear performance, good low-temperature performance, high elasticity, short cycle times, and high transparency.

HuntsmanIROGRAN® A 70 H 4714 N

Polymer Name:Thermoplastic Polyurethane (Polyester based)
Processing & Application Methods:Injection Molding
Product End Uses:Thick-Walled Parts, Thin-Walled Parts
Density:1180.0 kg/m³

IROGRAN® A 70 H 4714 N is a polyester-based thermoplastic polyurethane (TPU) for injection molding applications. Key features include phthalate-free composition, low hardness and modulus, excellent wear performance, good low-temperature performance, high elasticity, and high transparency.

HuntsmanIROGRAN® A 70 P 6027 UV

Polymer Name:Thermoplastic Polyurethane (Polyether based)
Processing & Application Methods:Injection Molding
Product End Uses:Thick-Walled Parts, Thin-Walled Parts
Density:1070.0 kg/m³

IROGRAN® A 70 P 6027 UV is a polyether-based thermoplastic polyurethane (TPU) for injection molding applications. Key features include plasticizer-free composition, excellent hydrolysis and microbial resistance, low density, improved UV stability, good low-temperature performance, and high elasticity.

HuntsmanIROGRAN® A 78 E 4723

Polymer Name:Thermoplastic Polyurethane (Polyester based)
Processing & Application Methods:Extrusion, Injection Molding
Product End Uses:Hoses, Spiral Tubes, Thin-Walled Parts
Density:1190.0 kg/m³

IROGRAN® A 78 E 4723 is a polyester-based thermoplastic polyurethane (TPU) for extrusion and injection molding applications. It is plasticizer-free and offers good oil and solvent resistance, excellent wear performance, resistance to dynamic stress, and high transparency.

HuntsmanIROGRAN® A 80 H 4698

Polymer Name:Thermoplastic Polyurethane (Polyester based)
Processing & Application Methods:Injection Molding
Product End Uses:Footwears, Gaskets, Seals
Density:1190.0 kg/m³

IROGRAN® A 80 H 4698 is a polyester-based thermoplastic polyurethane (TPU) for injection molding applications. Key features include plasticizer-free, excellent wear performance, good low-temperature performance, high elasticity, short cycle times, and high transparency.

HuntsmanIROGRAN® A 80 P 5039 FCM

Polymer Name:Thermoplastic Polyurethane (Polyether based)
Processing & Application Methods:Extrusion, Injection Molding
Product End Uses:Cable Jacketing, Conveyor Belts, Films, Hoses, Sheets, Spiral Tubes, Thick-Walled Parts, Thin-Walled Parts
Density:1100.0 kg/m³

IROGRAN® A 80 P 5039 FCM is a food contact approved polyether-based Thermoplastic Polyurethane (TPU) for extrusion and injection molding applications. Key features are excellent hydrolysis and microbial resistance, low hardness and modulus, excellent wear performance, good low temperature performance, high elasticity, robust processing and high transparency.

HuntsmanIROGRAN® A 85 E 4719 FCM

Polymer Name:Thermoplastic Polyurethane (Polyester based)
Processing & Application Methods:Calendering, Extrusion
Product End Uses:Conveyor Belts, Hoses, Thick-Walled Extrusion Profile, Thick-Walled Parts, Tubes
Density:1110.0 kg/m³

IROGRAN® A 85 E 4719 FCM is a food contact approved polyester-based thermoplastic polyurethane (TPU) for melt calendering. It offers excellent multilayer bonding, excellent wear performance, and robust processing.

HuntsmanIROGRAN® A 85 E 4993 FCM

Polymer Name:Thermoplastic Polyurethane (Polyester based)
Processing & Application Methods:Calendering, Extrusion, Injection Molding
Product End Uses:Barrier Films, Bladders, Emblems, Footwears, Labels, Roofing Membranes, Water Tanks
Density:1210.0 kg/m³

IROGRAN® A 85 E 4993 FCM is a food-contact approved polyester-based thermoplastic polyurethane (TPU) for melt calendering. Key features include plasticizer-free, abrasion resistance, excellent wear performance, good low-temperature performance, and high elasticity.

HuntsmanIROGRAN® A 86 E 4486

Polymer Name:Thermoplastic Polyurethane (Polyester based)
Processing & Application Methods:Extrusion, Injection Molding
Product End Uses:Spiral Hoses, Thin-Walled Extrusion Profile
Density:1210.0 kg/m³

IROGRAN® A 86 E 4486 is a polyester-based Thermoplastic Polyurethane (TPU) for extrusion and injection molding applications. Key features are excellent wear performance, good low temperature performance, resistance to dynamic stress, robust processing and high transparency.

HuntsmanIROGRAN® A 95 P 5044

Polymer Name:Thermoplastic Polyurethane (Polyether based)
Density:1140.0 kg/m³

IROGRAN® A 95 P 5044 is a pellet-form material used in automotive and transportation, building and construction, equipment and parts, and sports and recreation. It features excellent hydrolysis resistance, transparency, microbe resistance, and UV resistance, making it ideal for applications requiring durable, transparent, and long-lasting performance in challenging environments.

HuntsmanIROGRAN® A 95 P 5044 H

Polymer Name:Thermoplastic Polyurethane (Polyether based)
Processing & Application Methods:Extrusion, Injection Molding
Product End Uses:Cable Jacketing, Films, Pneumatic Tube Applications, Sheets, Spiral Hoses
Density:1150.0 kg/m³

IROGRAN® A 95 P 5044 H is a polyether-based Thermoplastic Polyurethane (TPU) for extrusion and injection molding applications. Key features are excellent hydrolysis and microbial resistance, excellent wear performance, good low temperature performance and high transparency.

Show

of 28 results