Products

ARALDITE® 1570 FST A/B is a halogen-free two-component epoxy adhesive. It is designed for aerospace applications that require flame-retardant properties, with its first application being PE foam to phenolic GRP bonding in cargo areas.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2033 A/B is a room temperature curing, self-extinguishing epoxy adhesive. It has been tested against stringent norms for electronics and railway applications. This adhesive has well-balanced tensile properties: a medium modulus and a high elongation at break. It is suitable for structural applications requiring high strength.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® CW 5942-1 / ARADUR® HW 5943-1 is an anhydride-based, heat-curing, low-viscosity prefilled casting resin system that meets UL 94 V0 requirements. This resin system is suitable for fulfilling the Cenelec Standard HD 464: F1 E2 C2. It is used in indoor electrical insulation parts for medium and high voltage applications, such as dry-type distribution transformers, particularly flame-retardant dry-type transformers and instrument transformers by impregnation or vacuum casting.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® CY 30200 / ARADUR® HY 30201 is a Hot-curing, solvent-free, low-viscosity impregnating resin system with high latency, good bath stability and high reactivity at elevated temperatures Flame retardant system

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARATHANE® CW 5620 / ARATHANE® HY 5610 is a polyurethane, halogen-free, casting and impregnating system for processing and curing at room temperature. Soft multipurpose polyurethane system for pressure-sensitive devices. Available in various colors. It is used in Transformers, filters, capacitors, etc.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARATHANE® CW 5660 / ARATHANE® HY 5610 is a polyurethane, casting and impregnating system for processing and curing at room temperature. The cured resin system is flexible even at low temperatures, flame retardant, and has high thermal conductivity and excellent thermal resistance. It contains non-abrasive fillers and no halogenated flame-retardants. It is used in Solar inverters, modules, pressure pressure-sensitive devices.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

CG-1305 Resin/Hardener epoxy syntactic is a medium-density, pourable material for aircraft production and other industrial applications requiring high strength and low weight. This system combines good handling and good physical properties. CG-1305 Resin/Hardener epoxy syntactic is designed for reinforcing high stress areas in honeycomb structures and for potting applications. CG-1305 Resin / Hardener epoxy syntactic is qualified to BMS 5-28, Type 7, Class 3.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

EPIBOND® 1544-1 A-82/D Epoxy Adhesive is a two-component beige paste. This epoxy adhesive is non-flowing on vertical surfaces and forms excellent bonds between metals, composite laminates, most thermoplastics, and many other dissimilar materials. EPIBOND® 1544-1 A-82/DC Epoxy Adhesive can be used to fabricate or repair aircraft interior parts that fulfill FAR 25.853 and O.S.U. requirements when used in conjunction with other flame-retardant components. This adhesive is also available in different colors (EPIBOND® 1544-1 A/C Adhesive - Off-White and EPIBOND® 1544-1 A-71/D Adhesive - White).

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

EPIBOND® 8000 A/B is an extrudable two-component epoxy structural adhesive designed for applications requiring FST properties or flame retardancy (FAR 25.853). This adhesive is suitable for bonding a wide variety of composite materials, metal, and other dissimilar substrates. EPIBOND® 8000 A/B does not contain any halogenated or antimony-based flame retardant additives. This adhesive has a convenient mix ratio, moderate work life, and is easily dispensed from cartridges or metering equipment.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

EPOCAST® 1511-A/B epoxy syntactic is a non-flowing, two-part paste suitable for edge filling of honeycomb structures and/or metal fairings, as well as for bonding applications. EPOCAST® 1511-A/B epoxy syntactic is qualified to BMS 5-28, Type 3.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

EPOCAST® 1610-A1 epoxy syntactic is a very low-density, self-extinguishing, one-part compound with a long storage life at room temperature. It can be co-cured with composites at 250°F (121°C) and is ideal for replacing foam or wood blocks in honeycomb panels, offering high strength and no mark-off after curing.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

EPOCAST® 1614-A3 Epoxy Structural Syntactic Adhesive is a flame-retardant, low-density, frozen, one-component material used to reinforce honeycomb composite parts requiring high compressive strength at elevated temperatures up to 350°F (177°C). This material has been qualified to NTR-MS 1301A Ty II, CL IV, GR F, and RMS 027 Type XII specifications and meets the requirements of BMS5-28, Ty 14, CL 1 & 2, and other specifications. EPOCAST® 1614-A3 Epoxy Structural Syntactic Adhesive does not contain any SVHC (Substance of Very High Concern) as defined under REACH.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

EPOCAST® 1617-A/B epoxy syntactic is a low-density, self-extinguishing compound for edge sealing honeycomb structures. The lightweight epoxy is an easy-to-handle material that exhibits high strength after curing. EPOCAST® 1617-A/B epoxy syntactic cures to an off-white color and is qualified to BMS 5-28, Type 17.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

EPOCAST® 1618-D / B epoxy syntactic is a low-density, flame-retardant compound for potting fasteners in honeycomb structures. The lightweight epoxy is easy to extrude through a 1/8 in (3 mm) nozzle orifice but is non-flowing after application. Epocast® 1618 D/B epoxy syntactic sets quickly at room temperature and is qualified to BMS 5-28, Type 18, Class 1. It is the suggested alternative for the discontinued Epocast® 1616 A/B epoxy syntactic, Epocast® 1618 A/B epoxy syntactic, and Epocast® 1620 A/B epoxy syntactic systems.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

EPOCAST® 1619-1 A/B is a low-density, flame-retardant compound for potting fasteners in honeycomb structures. The lightweight epoxy can be poured or extruded through a 1/8 in. (3mm) nozzle orifice. It is resistant to water, fungus, and most aircraft fluids and qualified for Boeing BMS5-28, Type 19

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.