Products

ARADUR® 125 BDB Hardener is a polyamide material produced by the condensation of dimeric acids and selected polyamines. It has good wetting characteristics and, when used to cure Araldite® epoxy resins, provides excellent flexibility, toughness, and overall performance properties.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARADUR® 450-1 S is a polyamidoamine-based chemical compatible with concrete, metal, mortar, and steel surfaces. It enhances bonding and curing properties in various industrial applications involving these materials.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARADUR® 46-1 is a polyamine-based chemical used in anti-corrosion coatings and industrial additives. It is specifically designed for use in epoxy mortars and flooring applications, providing enhanced durability and protection.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® AW 4752 / HARDENER HW 4753 is a two-component, room-temperature curing paste adhesive of high strength and toughness. When fully cured, the adhesive will have excellent performance at elevated temperatures and high chemical resistance. It is suitable for bonding a wide variety of metals and other materials in many industrial applications where resistance to aggressive or warm environments is required. The combination of properties makes the adhesive ideal for bonding industrial filters for hydraulic oils.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® CW 2245 / ARADUR® HY 2954 is an epoxy-based casting system for processing and curing at elevated temperatures.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® DY 023 is cresyl glycidyl ether (CGE). Liquid epoxy resins based on bisphenol A and epichlorohydrin are sometimes too viscous for certain applications. The viscosity of these liquid resins can be reduced by adding solvents, plasticizers, or reactive diluents. However, when formulating thick coatings, the use of solvents is not recommended because they cannot be completely driven off. Plasticizers are often unsuitable for electrical applications or where heat resistance is required. Reactive diluents are free-flowing, low molecular weight compounds (130–210) that participate in the curing reaction and significantly reduce the viscosity of the epoxy resin system. Although reactive diluents can affect the final properties of the cured resin/hardener system, they represent the best choice for viscosity reduction. ARALDITE® DY 023 is less volatile and exhibits good resistance to water. It can be added to epoxy resins in quantities of 2–20% by weight. Additions exceeding 20% can cause considerable deterioration of the cured system's properties.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® DY A diluent is a colorless, clear aliphatic glycidyl ether based on 2-ethylhexanol. It is primarily used as an additive to reduce the viscosity of liquid epoxy resins. The relatively long alkyl chain structure of ARALDITE® DY-A, combined with the polar epoxy group, results in efficient viscosity reduction and reduced surface tension. Epoxy resins modified with ARALDITE® DY-A diluent exhibit good wetting and leveling properties at low diluent concentrations.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® DY K is a cresyl glycidyl ether (CGE). Liquid epoxy resins, based on bisphenol A and epichlorohydrin, are sometimes too viscous for use in certain applications. The viscosity of liquid resins can be reduced by the addition of solvents, plasticizers or reactive diluents. When formulating thick coatings, the incorporation of solvents is not recommended, since it is impossible to drive them off completely. Plasticizers cannot be tolerated in many electrical applications or where heat resistance properties are required. Reactive diluents are free-flowing compounds of low molecular weight (130-210) that take part in the curing reaction and considerably decrease the viscosity of an epoxy resin system. Although the addition of reactive diluents will always have some influence on the end properties of the cured resin/hardener system, they represent the best choice of viscosity reduction. Araldite DY K is less volatile and shows good resistance to water. Araldite DY K can be added to epoxy resins in quantities of 2-20% by weight. Additions of more than 20% cause considerable deterioration the properties of the cured system.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® GZ 571 KX 75 is a low molecular weight solid epoxy resin supplied at 75% non-volatiles in xylene/methyl isobutyl ketone, used for formulating two-component industrial maintenance coatings.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® GZ 571 T 75 is a low molecular weight solid epoxy resin supplied at 75% non-volatiles in toluene, used for formulating two-component industrial maintenance coatings.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

The resin solution ARALDITE® GZ 597 KT 55 resin can be used to prepare industrial coatings having excellent chemical, solvent and abrasion resistance.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® GZ 7071 F 65 is low molecular weight solid epoxy resin solution supplied at 65% to 75% solids by weight in organic solvents. The Araldite® GZ 7071 epoxy resin solutions are suitable for the formulation of a wide variety of solvent borne coatings formulations. When cross-linked with polyamide, polyamine or amine adduct hardeners, these resins form hard, tough, chemically resistant coatings that cure at room temperature.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® GZ 7071 PM 75 is a low molecular weight solid epoxy resin supplied at 75% non-volatiles in propylene glycol monomethyl ether, used for formulating two-component industrial maintenance coatings.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® LY 3600 / ARADUR® 249-1 is an ambient or elevated low-viscosity temperature curing epoxy system and is a modified cycloaliphatic polyamine.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® LY 3600 / ARADUR® 3600-2 is an ambient or elevated low-viscosity temperature curing epoxy system and is a modified cycloaliphatic polyamine.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.