Products

ARALDITE® DY F is a difunctional, aliphatic, reactive diluent for epoxy resins.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® ECN 1400-1 is a Epoxy cresol novolac resin dispersion in water. Araldite® ECN 1400 Resin does not contain any organic solvent and is suitable for the formulation of adhesives, primers, fiber reinforced structures, and coatings with higher temperature performance, improved chemical resistance, and better adhesion properties than conventional waterborne epoxies

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® MY 0610 is a high-purity, low-viscosity trifunctional epoxy resin based on meta-aminophenol. It is used in adhesives, laminates, or other structural composite applications requiring high modulus, high hot-wet performance, and toughness.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

EPALLOY® 5001 N Resin is a hydrogenated bisphenol-A epoxy resin with improved chalking resistance and gloss retention to achieve optimal weathering resistance. Formulations based on EPALLOY® 5001 N Resin show improved cure speeds of up to 50% compared to the standard epoxidized hydrogenated bisphenol-A, EPALLOY® 5000 Resin. EPALLOY® 5001 N Resin shows improved adhesion and hardness development while maintaining low yellowing and excellent UV resistance. It contains no unsaturation or aromatic structures, providing excellent resistance to outdoor weathering. Cycloaliphatic amines are the recommended curing agents to achieve optimum weathering resistance, while aromatic compounds or acids should be avoided as they may reduce UV resistance.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

EPALLOY® 7192 N is an unmodified, high-molecular-weight bisphenol-A-based epoxy resin that is a semisolid material at room temperature. It is particularly well-suited for use in formulating durable high-solids coatings, toughened adhesives, laminating resins, and prepreg molding compounds. Compared to lower-molecular-weight epoxy resins, it provides faster cure, improved adhesion, more durable cured systems, and enhanced toughness, though with somewhat reduced high-temperature performance.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

GABEPRO™ GPM-830 CB is a mercaptan curing agent that enhances bonds between glass and metal, particularly brass and bronze. Ideal for two-component mixing equipment, it is mixed at a 1:1 epoxy/hardener ratio and can serve as a catalyst or co-curing material to improve adhesion.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

HYPOX® RK 820 is an adduct of solid bis-A epoxy resin toughened with CTBN, designed for powder coatings. It can be used as the sole epoxy resin or as a modifier to enhance impact tolerance, toughness, and adhesion to pipe. With 20% CTBN content, it is also suitable for adhesives, laminates, and solvent-based coatings.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

HYPRO® reactive liquid polymers (RLPs) are 100% liquid rubbers used to improve toughness, flexibility, adhesion and impact resistance of thermoset resin systems including epoxies, vinyl esters, unsaturated polyesters, acrylics and urethanes. HYPRO® 1300X13 CTBN reactive liquid polymer is a carboxyl-terminated butadiene-acrylonitrile copolymer used predominantly as a reactant with a base thermoset resin to gain product performance improvements. These adducts can be incorporated at various levels to suit the needs of your specific formulation.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

HYPRO® Reactive Liquid Polymers (RLP) are 100% solids liquid rubbers used to improve the toughness, flexibility, adhesion, and impact resistance of thermoset resin systems including epoxies, vinyl esters, unsaturated polyesters, acrylics, and urethanes. HYPRO® 1300X42 ATBN is an amine terminated butadiene-acrylonitrile copolymer used predominately with other amine functional compounds to improve product performance when added to thermoset resin systems. The amine structure of HYPRO® 1300X42 ATBN is based on methylpentamethylenediamine.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

HYPRO® Reactive Liquid Polymers (RLP) are 100% solids liquid rubbers used to improve the toughness, flexibility, adhesion, and impact resistance of thermoset resin systems, including epoxies, vinyl esters, unsaturated polyesters, and acrylics. The elastomer improves toughness, impact resistance, thermal shock resistance, and peel resistance of the epoxy formulation. These improvements are achieved with little loss of thermal resistance and modulus. HYPRO® 1300X68 ETBN Reactive Liquid Polymer is compatible with all standard Bis-A epoxy resins and curing agents.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

NYCHEM® 1570X75 carboxylated, acrylonitrile-butadiene-styrene Latex utilizes a synthetic anionic surfactant enabling good chemical and mechanical stability. This provides the best formulating capabilities, machine runnability, and good wetting properties with reduced pH sensitivity for binder and coating applications. A feature of this latex is smaller particle size for improved web penetration and faster drying great for adhesive applications. As a paper saturant, it can be used in abrasion, automotive masking tape, friction, and printing blanket backer paper products. Also, it sports a soft-touch feel and low Tg. The styrenated nitrile provides a good balance of polar and nonpolar solvent resistance. Also, it has good flexibility and impact resistance with improved adhesion to metal substrates. The carboxylated functionality allows the polymer to be crosslinked internally or with the substrate using metal complexes, amino and phenol formaldehyde resins, and epoxies further improving performance. Additional toughness, abrasion, and chemical resistance can be further enhanced though vulcanization using a sulfur donor.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.