9 Products found on Huntsman
ARADUR® 3253-1 is a low-viscosity, formulated cycloaliphatic polyamine hardener.
The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.
The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.
ARADUR® 3986 epoxy curing agent is an amine hardener specially formulated for water-dilutable epoxy resin systems. This product is free of volatile amines and solvents. It was developed for the formulation of anticorrosive primers that is using waterborne epoxy resins such as ARALDITE® PZ 3961-1 epoxy resin and other water-based coatings. ARADUR® 3986 epoxy curing agent provides a visible end of the usable life (indicated by viscosity increase) and the desired combination of fast set-to-touch times and long pot life with both modified and unmodified liquid epoxy resins, such as ARALDITE® GY 6010 or ARALDITE® GY 9615.
ARADUR® 53-1 S is a low-viscosity, formulated cycloaliphatic polyamine hardener.
ARALDITE® DY T is a reactive diluent that can be used in combination with unmodified liquid epoxy resins such as Araldite® GY 6010, Araldite® GY 282, or Araldite® EPN 9850 to prepare low-viscosity epoxy systems. These systems are suitable for formulating solvent-free coatings, flooring, and mastics. The reactive diluent content in the resin system should not exceed 20%.
ARALDITE® DY-31 is a multi-functional reactive diluent for epoxy resins, offering 100% solids and chemical-resistant coatings. It is suitable for concrete crack repair, coatings for containment areas, and high-performance adhesives.
ELASTAMINE® HE-1000 is used in nylon manufacturing, compatible with fibers and fabrics, and serves as an industrial additive in textile applications.
ELASTAMINE® HE-1700 is used in nylon manufacturing and is compatible with fibers and fabrics, serving as an industrial additive in textile applications.
EPALLOY® 5001 N Resin is a hydrogenated bisphenol-A epoxy resin with improved chalking resistance and gloss retention to achieve optimal weathering resistance. Formulations based on EPALLOY® 5001 N Resin show improved cure speeds of up to 50% compared to the standard epoxidized hydrogenated bisphenol-A, EPALLOY® 5000 Resin. EPALLOY® 5001 N Resin shows improved adhesion and hardness development while maintaining low yellowing and excellent UV resistance. It contains no unsaturation or aromatic structures, providing excellent resistance to outdoor weathering. Cycloaliphatic amines are the recommended curing agents to achieve optimum weathering resistance, while aromatic compounds or acids should be avoided as they may reduce UV resistance.
PROBIMER® 77-72105 / 79010 a is a photo-imageable, negative working solder mask optimized for flood screen print application. The solder mask exhibits a semi-matter surface. Probimer 77 72105 is halogen-free and meets the requirements of the JPCA standard. It is developed in aqueous alkaline solution. Two-component system: Resin Probimer 77 72105 and Hardener 77 79010, it is used in solder mask - white alkaline developable two-component-system flood screen print application.
