5 Products found on Huntsman
AGOMET® F 307 A/B is a two-component, room-temperature curing, "no-mix" methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has an assembly time of 3 minutes. As early as 8 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 2 hours. Bonds produced with AGOMET® F 307 A/B have less shrinkage during curing than most other AGOMET® F series.
The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.
The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.
AGOMET® F 330 / HARDENER Lacquer 2 is a "no-mix" room-temperature curing methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has an assembly time of 10 minutes. As early as 20 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 2 hours. Bonds produced with AGOMET® F 330 / HARDENER Lacquer 2 show good tensile shear and peel strengths, as well as good temperature resistance.
ARALDITE® F 300 / HARDENER Lacquer 2 is a “No-mix” room temperature curing, methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has an assembly time of 1 – 2 minutes. As early as 5 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 2 hours. Bonds produced with Araldite® F300 show good tensile shear and peel strengths as well as good thermal stability between -40°C and +130°C.
ARALDITE® F 305 / HARDENER Lacquer 2 is a room-curing, "No-Mix" process methacrylate adhesive recommended for bonding metals and plastics. Its rapid setting at room temperature allows parts to be handled in a very short time. The adhesive has a pot life of 1-2 minutes. After just 5 minutes (curing at room temperature), parts can be handled. Optimal properties are achieved within 2 hours. Assemblies bonded with Araldite® F305 have good tensile-shear and peel strength as well as good thermal stability between —400C and +1300C.
ARALDITE® F 310 / HARDENER Lacquer 2 is a “No-mix” room temperature curing, methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has an assembly time of 10 minutes. As early as 20 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 2 hours. Bonds produced with Araldite® F310 show good tensile shear and peel strengths as well as good thermal stability between -40°C and +130°C.
