Products

AGOMET® F 307 A/B is a two-component, room-temperature curing, "no-mix" methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has an assembly time of 3 minutes. As early as 8 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 2 hours. Bonds produced with AGOMET® F 307 A/B have less shrinkage during curing than most other AGOMET® F series.

ARALDITE® 420 A/B is a two-component, room temperature curing paste adhesive of high strength and toughness. It is suitable for a wide variety of metal, honeycomb, and fiber-reinforced composite bonding applications. It has very high shear strength even at temperatures up to 70°C and good peel strength.

ARALDITE® 5871 A/B epoxy adhesive is a multi-purpose, viscous material that is suitable for bonding a variety of materials including metal, ceramic, and wood. This electrically insulating adhesive is easy to apply either manually by spatula and stiff brush or mechanically with meter/mix and coating equipment. ARALDITE® 5871 A/B epoxy adhesive cures at temperatures from 20°C (68°F) to 180°C (356°F) with no release of volatile constituents.

ARALDITE® CY 192-1 / ARADUR® HY 918-1 is an impregnating resin system. It is a liquid, hot-curing, cycloaliphatic, solventless impregnating resin system, with a low-viscosity, two-component system without reactive diluents. It has a long pot life.

ARALDITE® F 365 A / AGOMET® F305 B / HARDENER Powder / Paste is a low viscosity two component, room temperature curing, “No-mix” methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has an assembly time of 1 - 2 minutes. As early as 5 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 24 hours. Bonds produced with Araldite® F365A and Agomet® F305B show good tensile shear and outstanding peel strengths as well as good moisture resistance.

EPIBOND® 115 A/B is an extrudable, two-component, heat-curing epoxy structural adhesive designed for service temperatures up to 300°F (149°C). This product is suitable for bonding a wide variety of materials, such as metals, composites, and other similar substrates. The combination of high strength and high Tg performance makes this adhesive well-suited for aerospace and other demanding applications. EPIBOND® 115 A/B contains 5 mil (125 micron) spacer beads to help provide a uniform bond line required in high-stress areas.

EPIBOND® 420-A/B Epoxy Adhesive is a two-component, modified epoxy, room-temperature curing paste with high strength and toughness. It is suitable for a wide variety of metal, honeycomb, and fiber-reinforced composite bonding applications requiring high shear strength and good peel strength. EPIBOND® 420 A/B contains 5 mil (125 µm) spacer beads to provide the very uniform bond line required in high-stress areas. EPIBOND® 420 A/B structural epoxy adhesive replaces REDUX 410 NA epoxy adhesive and meets the requirements of BMS 5-107.