Products

AGOMET® F 330 / HARDENER Lacquer 2 is a "no-mix" room-temperature curing methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has an assembly time of 10 minutes. As early as 20 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 2 hours. Bonds produced with AGOMET® F 330 / HARDENER Lacquer 2 show good tensile shear and peel strengths, as well as good temperature resistance.

AGOMET® F 330 / HARDENER Paste is a room-temperature curing methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has a pot life of approximately 10 minutes. As early as 20 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 2 hours. Bonds produced with AGOMET® F 330 / HARDENER Paste show good tensile shear and peel strengths, as well as good temperature resistance. The product can fill gaps of up to 5mm.

AGOMET® F 330 / HARDENER Powder with hardener powder or hardener paste is a room-temperature curing methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has a pot life of approximately 10 minutes. As early as 20 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 2 hours. Bonds produced with AGOMET® F 330 / HARDENER Powder show good tensile shear and peel strengths, as well as good temperature resistance. The product can fill gaps of up to 5mm.

ARALDITE® 2015-1 A/B is a two-component, room temperature curing, pale-colored, lightly thixotropic liquid polyurethane adhesive for thermoplastic bonding.

ARALDITE® CA 125-1 KIT is araldite medium setting adhesive paste number 125 is a specially formulated, pre-filled epoxy paste, suitable for use where a sag resistant adhesive is required to produce high strength permanent bonds

ARALDITE® CA 273-1 KIT is araldite medium setting adhesive paste number 125 is a specially formulated, pre-filled epoxy paste, suitable for use where a sag resistant adhesive is required to produce high strength permanent bonds

ARALDITE® CA 80 is a pre-filled epoxy grout, specially formulated as a liquid for use as a grouting material and for bonding new to old concrete.

ARALDITE® F 305 / HARDENER Lacquer 2 is a room-curing, "No-Mix" process methacrylate adhesive recommended for bonding metals and plastics. Its rapid setting at room temperature allows parts to be handled in a very short time. The adhesive has a pot life of 1-2 minutes. After just 5 minutes (curing at room temperature), parts can be handled. Optimal properties are achieved within 2 hours. Assemblies bonded with Araldite® F305 have good tensile-shear and peel strength as well as good thermal stability between —400C and +1300C.

ARALDITE® F 310 / HARDENER Lacquer 2 is a “No-mix” room temperature curing, methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has an assembly time of 10 minutes. As early as 20 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 2 hours. Bonds produced with Araldite® F310 show good tensile shear and peel strengths as well as good thermal stability between -40°C and +130°C.

ARALDITE® F 365 A / AGOMET® F305 B / HARDENER Powder / Paste is a low viscosity two component, room temperature curing, “No-mix” methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has an assembly time of 1 - 2 minutes. As early as 5 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 24 hours. Bonds produced with Araldite® F365A and Agomet® F305B show good tensile shear and outstanding peel strengths as well as good moisture resistance.