Products

AGOMET® F 305 A/B is a low-viscosity, two-component, room-temperature curing, "no mix" methacrylate adhesive suitable for bonding metals and plastics. The high cure rate of this product at room temperature allows it to cure bonded parts in a short time. The adhesive has an assembly time of 1 - 2 minutes, and after 5 minutes, the bonded parts are cured and will reach their final cured strength within 24 hours. Bonds made with AGOMET® F 305 A/B exhibit excellent tensile shear strength, peel strength, as well as excellent moisture and heat resistance.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

AGOMET® F 307 A/B is a two-component, room-temperature curing, "no-mix" methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has an assembly time of 3 minutes. As early as 8 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 2 hours. Bonds produced with AGOMET® F 307 A/B have less shrinkage during curing than most other AGOMET® F series.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

AGOMET® F 330 / HARDENER Lacquer 2 is a "no-mix" room-temperature curing methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has an assembly time of 10 minutes. As early as 20 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 2 hours. Bonds produced with AGOMET® F 330 / HARDENER Lacquer 2 show good tensile shear and peel strengths, as well as good temperature resistance.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

AGOMET® F 330 / HARDENER Paste is a room-temperature curing methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has a pot life of approximately 10 minutes. As early as 20 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 2 hours. Bonds produced with AGOMET® F 330 / HARDENER Paste show good tensile shear and peel strengths, as well as good temperature resistance. The product can fill gaps of up to 5mm.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

AGOMET® F 330 / HARDENER Powder with hardener powder or hardener paste is a room-temperature curing methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has a pot life of approximately 10 minutes. As early as 20 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 2 hours. Bonds produced with AGOMET® F 330 / HARDENER Powder show good tensile shear and peel strengths, as well as good temperature resistance. The product can fill gaps of up to 5mm.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2011 A/B is a multipurpose, two-component, room temperature curing, paste adhesive with high strength and toughness. It is suitable for bonding a wide variety of metals, ceramics, glass, rubber, rigid plastics, and most other materials in common use. It is a versatile adhesive for craftsmen as well as most industrial applications.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2012 A/B is a rapid cure, multipurpose, two-component, room temperature curing, high-viscosity liquid adhesive with high strength and toughness. It is suitable for bonding a wide variety of metals, ceramics, glass, rubbers, rigid plastics, and most other materials in common use. It is a versatile adhesive for craftsmen as well as most industrial applications.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2012-1 Adhesive is a rapid, room-temperature cure multipurpose epoxy adhesive with high strength and toughness. It is a viscous, flowing liquid and can be used to bond a wide variety of metals, ceramics, wood, glass, rubbers, rigid plastics, and other materials in common use.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2013-1 A/B is a two-component, room temperature curing paste adhesive with high strength and toughness. It is thixotropic with good environmental and chemical resistance. Although it is designed as a metal bonding adhesive, it is also suitable for bonding other materials such as ceramics, glass, rubbers, rigid plastics, and a wide variety of other materials in common use.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2013-2 Adhesive is a two-component, room-temperature curing, paste adhesive of high strength and toughness. It is sag-resistant and offers good environmental and chemical resistance. Although designed primarily for metal bonding, the adhesive is also suitable for bonding other materials such as ceramics, glass, rubbers, rigid plastics, and many other materials in common use.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2014 A/B is a two-component, room temperature curing, thixotropic paste adhesive with high strength and excellent chemical resistance. It is used for bonding metals, electronic components, GRP structures, and many other items exposed to higher than normal temperatures or more aggressive environments. Its low outgassing makes it suitable for specialist electronic telecommunications and aerospace applications.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2014-1 A/B is a two-component, room-temperature curing paste adhesive. It is thixotropic and offers good environmental corrosion resistance and excellent chemical resistance. It is suitable for bonding metals, electronic components, fiberglass components, and other parts that may encounter high temperatures or harsh environments during use. Due to its low volatility, it can also be used in the special electronic communications and aviation industries.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2014-2 A/B is a two-component, room temperature curing, thixotropic paste adhesive of high strength with good environmental and excellent chemical resistance. It is used for bonding metals, electronic components, GRP structures, and many other items where higher-than-normal temperatures or more aggressive environments are encountered in service.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2014-3 Adhesive is a two-component, room-temperature curing, sag-resistant paste adhesive with high strength and good environmental and chemical resistance. It can be used for bonding metals, electronic components, composite materials, and many other applications where higher temperatures or aggressive environmental conditions are encountered in service.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2015 A/B is a two-component, room-temperature curing paste adhesive that provides a resilient bond. It is thixotropic and non-sagging up to 0.394 inches (10 mm) thickness. It is particularly suitable for SMC and GRP bonding.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.