Products

ARALDITE® 2014 A/B is a two-component, room temperature curing, thixotropic paste adhesive with high strength and excellent chemical resistance. It is used for bonding metals, electronic components, GRP structures, and many other items exposed to higher than normal temperatures or more aggressive environments. Its low outgassing makes it suitable for specialist electronic telecommunications and aerospace applications.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2014-2 A/B is a two-component, room temperature curing, thixotropic paste adhesive of high strength with good environmental and excellent chemical resistance. It is used for bonding metals, electronic components, GRP structures, and many other items where higher-than-normal temperatures or more aggressive environments are encountered in service.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2028-1 A/B is a two-component, transparent, cold-curing polyurethane adhesive with a flash point above 100 °C. ARALDITE® 2028-1 adhesive is fast curing and UV stable. It is suitable for bonding a variety of metal and plastic substrates.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2033 A/B is a room temperature curing, self-extinguishing epoxy adhesive. It has been tested against stringent norms for electronics and railway applications. This adhesive has well-balanced tensile properties: a medium modulus and a high elongation at break. It is suitable for structural applications requiring high strength.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 2051 A/B is a fast curing, two-part methacrylate adhesive designed to accelerate structural bonding operations while providing high toughness and resilience to vibrations, impact, and dynamic loading.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® 7307 A Normal is a liquid resin from the epoxy and epoxy derivatives family, serving as a binder and resin. It is suitable for various markets, including adhesives and sealants, automotive, cold-chain insulation, and industrial sectors. It also caters to power transmission, printed circuit boards, and sports and recreation, focusing on epoxies, thermoset resins, and composite material technologies.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® AW 8621 is a liquid adhesive designed for adhesives and sealants markets, particularly in electrical and electronics and industrial applications. It is available in the Americas and Asia Pacific regions, focusing on adhesives and sealants technologies.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® CW 21043 is a paste resin from the chemical mixtures and blends family. It is suitable for adhesives and sealants markets, including aerospace and aviation, automotive, cold-chain insulation, off-road and recreational vehicles (RV), paints and coatings, power transmission and distribution, printed circuit boards (PCBs), and sports and recreation.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® DY 023 is cresyl glycidyl ether (CGE). Liquid epoxy resins based on bisphenol A and epichlorohydrin are sometimes too viscous for certain applications. The viscosity of these liquid resins can be reduced by adding solvents, plasticizers, or reactive diluents. However, when formulating thick coatings, the use of solvents is not recommended because they cannot be completely driven off. Plasticizers are often unsuitable for electrical applications or where heat resistance is required. Reactive diluents are free-flowing, low molecular weight compounds (130–210) that participate in the curing reaction and significantly reduce the viscosity of the epoxy resin system. Although reactive diluents can affect the final properties of the cured resin/hardener system, they represent the best choice for viscosity reduction. ARALDITE® DY 023 is less volatile and exhibits good resistance to water. It can be added to epoxy resins in quantities of 2–20% by weight. Additions exceeding 20% can cause considerable deterioration of the cured system's properties.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® ECN 1273 is a polyepoxide resin produced by reacting epichlorohydrin with an ortho-cresol formaldehyde novolac. The molecular weight of the novolac controls the resin’s molecular weight and functionality, which ranges from 2.5 to 5.5 reactive groups per molecule. Unlike conventional bisphenol-A based epoxy resins, this polyepoxide offers multiple reactive sites, enhancing crosslinking density and performance.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® ECN 1280 is a polyepoxide resin produced by reacting epichlorohydrin with an ortho-cresol formaldehyde novolac. The novolac’s molecular weight determines the resin’s molecular weight and functionality, which ranges from 2.5 to 5.5 reactive groups per molecule. Compared to conventional bisphenol-A based epoxy resins, this polyepoxide offers multiple reactive sites, resulting in enhanced crosslinking and improved material properties.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® ECN 9511 is a polyepoxide resin synthesized by reacting epichlorohydrin with an ortho-cresol formaldehyde novolac. The molecular weight of the novolac influences the resin’s molecular weight and functionality, which typically ranges from 2.5 to 5.5 reactive groups per molecule. Unlike conventional bisphenol-A based epoxy resins, this polyepoxide contains multiple reactive sites, enabling higher crosslink density and enhanced performance.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® EPN 1138 A 85 is a semi-solid multifunctional epoxy phenol novolac resin with superior chemical resistance. It is supplied as an 85% non-volatile solution in acetone. This product offers excellent performance at elevated temperatures along with outstanding chemical durability.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® EPN 1138 MBC is a resin technically identical to ARALDITE® EPN 1138, distinguished by its REDcert2 certification. This certification verifies that 100% of the fossil raw materials used in the production of this product have been replaced by sustainably certified biomass. In this document, the term ARALDITE® EPN 1138 refers interchangeably to both resins.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

ARALDITE® EPN 1138 N 80 SP is a semi-solid multifunctional epoxy phenol novolac resin known for its superior chemical resistance. Supplied as an 80% non-volatile solution in methyl ethyl ketone, it delivers excellent performance at elevated temperatures along with outstanding chemical durability.

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.