ACCELERATOR DY 062

ACCELERATOR DY 062 is a tertiary amine for ambient and high-temperature cured epoxy systems.

 

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

Functions: Accelerator

Chemical Family: Tertiary Amines

End Uses: Structural Adhesive

Compatible Polymers & Resins: Epoxies (EP)

BrochureSafety Data SheetTechnical Data Sheet
View All Documents

Enhanced TDS

Identification & Functionality

CASE Ingredients Functions
Accelerator
Chemical Family
Tertiary Amines
Composite Materials Functions
Accelerator
Function
Accelerator
Technologies
CASE,
Composite Materials
Product Families
CASE — Additives
Catalysts & Initiators
Composite Materials — Additives
Initiators, Promotors & Catalysts

Features & Benefits

CASE Ingredients Features
Low Viscosity
Labeling Claims
Solvent-free
Materials Features
Low Viscosity
Product Features
  • Tertiary amine based accelerator
  • For ambient and high temperature cure epoxy systems.
Product Features
  • Extremely low viscosity
  • ACCELERATOR DY 062 is used in combination with ARALDITE® Epoxy Resins and Hardeners based on carboxylic acid and anhydrides . The amount of ACCELERATOR added depends on the desired pot life as well as on other processing factors , such as temperature and duration of curing . As a guide line the proportion is 0.2 - 2.0 parts by weight in 100 parts of resin .
  • Tertiary amine based accelerator.
  • For ambient and high temperature cure epoxy systems.

Applications & Uses

Adhesive & Sealant End Applications
Structural Adhesive
Compatible Polymers & Resins
Epoxies (EP)
Application Details
  • Electrical insulation materials
  • Hot curing system for industrial composites

Properties

Physical Form
Liquid

Regulatory & Compliance

Chemical Inventories
AIIC (Australia),
DSL (Canada),
ENCS (Japan),
IECSC (China),
KECI (Korea),
PICCS (Phillipines),
TCSI (Taiwan),
TSCA (USA)

Packaging & Availability

Regional Availability
  • Americas
  • Asia Pacific
  • Australia
  • EIMEA

Storage & Handling

Storage Information

ACCELERATOR DY 062 should be stored between 18 and 40°C in original container protected from direct sunlight in a dry, cool and well ventilated area , away from food, drink and
incompatible materials. Keep container tighly closed and sealed until ready for use . Containers that have been opened must be carefully resealed and kept upright to prevent leakage . Don’t store in unlabelled containers. Use appropriate containment to avoid environmental contamination .

Other

Appearance
Clear, colorless liquid
Color (SDS)
Colorless
Odor (SDS)
Slight
Application Information
ValueUnitsTest Method / Conditions
Mix Ratio0.5-10.0g/100g
Physical Properties
ValueUnitsTest Method / Conditions
Density0.89-0.91g/cm³ISO 2811-3 at 20°C
Flash Point55.0°CDIN EN ISO 1523
Viscositymax. 10.0mPa.sISO 12058 at 25°C
SDS Physical and Chemical Properties
ValueUnitsTest Method / Conditions
Storage Temperature (SDS)2.0-40.0°C