ARADUR® 38-1

ARADUR® 38-1 is a formulated polyamine adduct dissolved in water.

Functions: Curing Agent, Hardener

Chemical Family: Amines, Polyamines

End Uses: Solventless & High Solids Coating

Features: Excellent Adhesion, Improves Flow

  • TypeDocument Name
View All Documents

Enhanced TDS

Identification & Functionality

CASE Ingredients Functions
Chemical Family
Function
Curing Agent,Hardener
Technologies
Product Families

Features & Benefits

CASE Ingredients Features
Product Properties
  • ARADUR® 38-1 contains no organic solvents. It represents an optimum solution in terms of high solids content combined with minimum hardener requirement.
  • When ARADUR® 38-1 is diluted with water, turbidity may occur. In pre-pigmented form, however, more stable hardener solutions can be produced.
  • In combination with suitable epoxy resins, relatively slow-drying films with good flow properties, good adhesion and a high gloss finish can be achieved. With (proportional) use of solid resin dispersions such as Araldite PZ 3961-1, drying times can be significantly shortened.
  • The pot life of dispersion coatings formulated with ARADUR® 38-1 is typically limited to a maximum of 1 - 2 hours (loss of gloss finish). A clear increase in viscosity occurs later especially in heavily diluted mixtures.
  • ARADUR® 38-1 being free of Nonylphenol was developped to succeed ARADUR® 38.

Applications & Uses

Coating End Applications
Compatible Substrates & Surfaces
Product Applications
  • Used with liquid epoxy resins such as Araldite® GY 776, or the emulsion PZ 33757/67, ARADUR® 38-1 is suitable for the formulation of water-dilutable coatings for application to mineral and metallic substrates.
  • Particularly suitable for solvent-free dispersion coatings with a high solids content.

Properties

Physical Form

Regulatory & Compliance

Technical Details & Test Data

Mixing Ratio
  • The optimum mix ratio for Araldite PY 33757 and Aradur 38-1 is 100 : 85 parts by weight.
  • The optimum mix ratio for Araldite PZ 3961-1 and Aradur 38-1 is 100 : 15 parts by weight.
  • Dependant on application and required properties the use of only 80% of recommended hardener amount might be preferable.

Safety & Health

Hazardous Decomposition and Handling Precautions
  • Hazardous decomposition products (when disposed of in fire) carbon monoxide, carbondioxide, nitrogen oxides and other toxic gases and vapours.
  • Mandatory and recommended industrial hygiene procedures should be followed whenever our products are being handled and processed.

Packaging & Availability

Regional Availability
  • Americas
  • Asia Pacific
  • Australia
  • EIMEA

Storage & Handling

Storage Condition

ARADUR® 38-1 should be stored in a dry place, preferably in the sealed original container, at temperatures between 2 and 40°C. The product should not be stored exposed to direct sunlight. Stir before use.

Shelf Life Information

Shelf life (at storage temperature between 2 - 40°C) - 3 years

Other

Appearance
Clear liquid
Color (SDS)
Yellow
Odor
Faint of amine
Chemical Properties
ValueUnitsTest Method / Conditions
Amine Value170.0-210.0 mg KOH/gmg KOH/gISO 9702
Physical Properties
ValueUnitsTest Method / Conditions
Density1.1 g/cm³g/cm³ISO 1675 at 23°C
Flash Pointmin. 100.0 °C°CPensky-Martens Closed Cup (PMCC)
Flash Pointmin. 100.0 °C°CISO 2719
Viscosity15.0-23.0 Pa.sPa.sISO 3219 at 25°C
Viscosity15.0-23.0 Pa.sPa.sRotational Viscometer at 25°C
Application Information
ValueUnitsTest Method / Conditions
Mix Ratio85.0 g/100gg/100gwith Araldite PY 33757