Products

AGOMET® F 305 A/B is a low-viscosity, two-component, room-temperature curing, "no mix" methacrylate adhesive suitable for bonding metals and plastics. The high cure rate of this product at room temperature allows it to cure bonded parts in a short time. The adhesive has an assembly time of 1 - 2 minutes, and after 5 minutes, the bonded parts are cured and will reach their final cured strength within 24 hours. Bonds made with AGOMET® F 305 A/B exhibit excellent tensile shear strength, peel strength, as well as excellent moisture and heat resistance.

AGOMET® F 307 A/B is a two-component, room-temperature curing, "no-mix" methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has an assembly time of 3 minutes. As early as 8 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 2 hours. Bonds produced with AGOMET® F 307 A/B have less shrinkage during curing than most other AGOMET® F series.

AGOMET® F 330 / HARDENER Lacquer 2 is a "no-mix" room-temperature curing methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has an assembly time of 10 minutes. As early as 20 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 2 hours. Bonds produced with AGOMET® F 330 / HARDENER Lacquer 2 show good tensile shear and peel strengths, as well as good temperature resistance.

AGOMET® F 330 / HARDENER Paste is a room-temperature curing methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has a pot life of approximately 10 minutes. As early as 20 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 2 hours. Bonds produced with AGOMET® F 330 / HARDENER Paste show good tensile shear and peel strengths, as well as good temperature resistance. The product can fill gaps of up to 5mm.

AGOMET® F 330 / HARDENER Powder with hardener powder or hardener paste is a room-temperature curing methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has a pot life of approximately 10 minutes. As early as 20 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 2 hours. Bonds produced with AGOMET® F 330 / HARDENER Powder show good tensile shear and peel strengths, as well as good temperature resistance. The product can fill gaps of up to 5mm.

ARADUR® 100 XM 60 is a very high viscosity polyamidoamine hardener dissolved in xylene/methoxy propanol.

ARADUR® 115 is a chemical blend from the polyamidoamine family, used in cold-curing core processes. It is compatible with metal, mineral substrates, and steel, offering enhanced adhesion and performance for these materials.

ARADUR® 115 X 70 is a high-viscosity polyamidoamine hardener dissolved in xylene.

ARADUR® 115-3 is a high-viscosity polyamidoamine hardener.

ARADUR® 115-3 X 70 is a high-viscosity polyamidoamine hardener dissolved in xylene.

ARADUR® 125-2 is a polyamide material produced by the condensation of dimer acids and selected polyamines. ARADUR® 125-2 hardener has good wetting characteristics. When used to cure ARALDITE® epoxy resins, it provides excellent flexibility, toughness, and good overall chemical resistance.

ARADUR® 125-3 is a high-viscosity polyamidoamine hardener.

ARADUR® 125-4 is a high-viscosity polyamidoamine hardener.

ARADUR® 140-2 is suitable for solvent-free and solvent-based coatings and adhesives.

ARADUR® 140-3 is a hardener suitable for cold-curing core processes, compatible with metal, mineral substrates, and steel. It is used in mastic and reactive adhesives, marine paints, solventborne coatings, and mortar in plastics and elastomers applications, offering robust bonding and durability.