Enhanced TDS
Identification & Functionality
- Chemical Family
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features and Benefits
- Good thermal shock resistance.
- Good dielectric properties.
- Good mechanical properties.
- Low halogene content.
- Long pot life.
- Excellent thermal endurance.
Applications & Uses
- Composites Processing Methods
- Product End Uses
- Applications
Transformers, filters, capacitors, etc.
- Processing Information
Preparation
CW 36100 contains fillers, which tend to settle over time. It is therefore recommended to carefully homogenize the complete contents of the container before use. In the storage vessels of the production equipment, the pre-filled products should be stirred up from time to time to avoid sedimentation and irregular metering.
Mixing
The casting mix is best prepared by heating the resin up to 40 – 50 °C before stirring in the hardener. Brief degassing of the mix under 5 – 10 mbar vacuum improves the mixture homogeneity and enhances the dielectric properties of the castings.
Curing
To determine whether cross-linking has been carried to completion and the final properties are optimal, it is necessary to carry out relevant measurements on the actual object or to measure the glass transition temperature. Different gel and cure cycles in the customer’s manufacturing process could lead to a different degree of cross- linking and thus a different glass transition temperature.
Technical Details & Test Data
- Standard Cure Cycle
24 hours at RT + 6 hours at 60°C
- Electrical Properties
Determined on standard test specimen at 23°C. Cured for 24h/RT + 6h/60°C.
Dielectric loss factor (tan 8, 50Hz, 25℃) IEC 60250 % 3.3 Dielectric constant (er, 50Hz, 25℃) IEC 60250 5.1 Volume resistivity (p, 25℃) IEC 60093 Ω cm 1014 - Minimum Curing Cycle
48 hours at RT
- Mechanical & Physical Properties
Determined on standard test specimen at 23°C. Cured for 24h/RT + 6h/60°C.
Glass transition temperature
ISO 6721
°C
80
Modulus in Torsion G' at RT
ISO 6721
MPa
3700
Chlorine content
EN 14582
ppm
<900
Bromine content
EN 14582
ppm
<600
Tensile modulus
ISO 527
MPa
7800
Tensile strength
ISO 527
MPa
47
Elongation at break
ISO 527
%
0.85
Flexural Modulus
ISO 178
MPa
8450
Flexural Strength
ISO 178
MPa
70
Surface strain
ISO 178
%
1
Alpha 1
ppm/K
42
Alpha 2
110
Hardness
DIN 53505
Shore D
70
Flammability
UL 94
BK
E96722
V - 0 (6 mm)
Storage & Handling
- Storage Conditions
Store the components in a dry place according to the storage conditions stated on the label in tightly sealed original containers. Under these conditions, the shelf life will correspond to the expiry date stated on the label. After this date, the product may be processed only after reanalysis. Partly emptied containers should be tightly closed immediately after use.